[llamaimperative]

Ehhh this isn’t quite the right takeaway, or at least it’s contrary to Deming’s approach.

The key insight from Deming’s work is that at any given moment there is only and exactly ONE thing that should be optimized. Once you optimize that, there will be a new SINGLE thing that is now slowing down the entire system, and must be optimized.

The goal of an engineer of a system (or manager of an org) is to develop a method to repeatedly identify and improve each new bottleneck as it appears, and to ignore other components even if they’re apparently not performing as well as they could.

[Jensson]

That is what everyone currently and we know the results, that only takes you from horribly slow to very slow.

In order to have a chance to get anywhere close to fast you need each component to already be very fast, and then you can build a fast system on top of those. When you work with slow components you wont use the right architecture for the system, instead you start working around the slowness of each component and you end up with a very slow mess.

Example: A function call is slow, it calls a thousand different things so you speed this up by putting a cache in front, great! But now this cache slows down the system, instead you could have sped up the function calls execution time by optimizing/trimming down those thousand things it calls.

Adding that cache there made you get further away from a fast system than you were before, not closer. One cache is negligible, but imagine every function creating a new cache, that would be very slow and basically impossible to fix without rewriting the whole thing.

[llamaimperative]

"Everyone knows this" yet you don't actually see organizations work like this almost ever in practice. Especially not software organizations. Instead you see big splashy initiatives to "overhaul performance" or whatever.

There is definitionally no more efficient way to improve the performance of a system than sequentially targeting each new bottleneck in its performance and nothing else.

Your example is just a case of picking a non-ideal method to improve a bottleneck. It's a lot easier to get this right when you're focusing on one important problem instead of generally "optimizing everything," which produces a clear incentive to take easy, immediately available, probably-not-ideal solutions all over the place.

[Jensson]

> There is definitionally no more efficient way to improve the performance of a system than sequentially targeting each new bottleneck in its performance and nothing else.

You are making an extremely strong statement here, how do you define "bottleneck" for this to be true? Many slow systems doesn't have bottlenecks, they are just slow overall with no bottlenecks.

[llamaimperative]

And this is the key insight that "everyone knows" and you apparently do not: every system has exactly one bottleneck at any given point in time. The bottleneck can move, alternate, or not be so significant relative to other near-bottlenecks that it's hard to spot, but there is exactly one.

Your perception that "there are no bottlenecks" is exactly the perception Deming set out to disprove.

Riddle me this: how can a system perform faster than its single slowest component?

It cannot. Ergo, there is a single bottleneck that sets the pace of the entire system.

[RaftPeople]

> every system has exactly one bottleneck at any given point in time.

Consider this system that has 5 sequential steps with these durations:

Step 1: 10 seconds

Step 2: 5 hours

Step 3: 7 seconds

Step 4: 5 hours

Step 5: 18 seconds

It would seem that both step 2 and step 4 are both bottlenecks. Are you saying that in reality one of those 2 steps would not typically be the exact duration so one of them would be considered the actual bottleneck?

[ulyssys]

In this example, assuming sequential steps, if step 2 must be performed before step 4, then it is step 2 which is the bottleneck.

After step 2 has been optimized, step 4 becomes the new bottleneck—assuming that optimization of step 2 is satisfactory.

While both steps 2 and 4 contribute to a slow system, a bottleneck means something else entirely: it is the single most significant point of slow down for the rest of the process.

To put it another way, it’s hindering the overall execution. If both use the same amount of time, then whichever is closer to the front of the process is by definition hindering more of the process.

[Jensson]

> every system has exactly one bottleneck at any given point in time

What, no they don't. Does a straight glass have a bottleneck? No, most bottles have it, but not straight glasses, hence not every system has a bottleneck.

The same applies to IT systems, there the topology is much more complex so often can have many bottlenecks, or sometimes fewer etc.

> Riddle me this: how can a system perform faster than its single slowest component?

A perfectly optimized component can't be a bottleneck but can still be the slowest component, trying to optimize that further will not speed up the system at all.

Here we see that you will miss a lot of optimization opportunities since you think the slowest component is the bottleneck, and not looking further.

[llamaimperative]

I don't find the glass <> IT system analogy compelling (or even sensical) at all.

Describe to me how an IT system can produce results (e.g. tickets closed, if you wish) at a rate higher than the processing rate of the slowest component.

> A perfectly optimized component can't be a bottleneck but can still be the slowest component, trying to optimize that further will not speed up the system at all.

Correct -- but neither will optimizing anything else! That's the whole point!

[hansvm]

> There is definitionally no more efficient way to improve the performance of a system than sequentially targeting each new bottleneck in its performance and nothing else.

Doing so misses any state you can't hit via small iterations (you'll find a local minimum rather than global). It's easy to whack-a-mole every performance bug you can find and still miss that swapping to a columnar representation or using 32-bit keys instead of 64-bit is all you need to double performance for your program. Or that, in effect, the big ball of classes are executing something quadratic when linear solutions exist, but since that degredation isn't isolated to a small unit of code you can't identify it.

Doing so, even when you _can_ iterate to the global minimum, isn't guaranteed to be the most efficient path either. Imagine, e.g., speeding up foo (the slowest thing [0]), then speeding up bar (the next slowest thing), and finding in your refactor of bar that you no longer need foo. All the optimizations that went into foo were wasted.

In practice, I've had a lot of success using "lines of code deleted" as an initial north star. Rather than trying to optimize from the get-go, focus on changes which remove a bunch of code, or better yet make it easier to remove even more code in the near future. Once you've trimmed it down 5-10x [1], it's probably already faster and less buggy, but at that point the task of actually optimizing is much easier. I don't know that doing so is the most efficient solution per se, but whack-a-mole performance fixes I think are usually worse.

[0] If bar calls foo, then obviously bar is actually slower than foo (ignoring mutual recursion), but you have to pick a small enough unit to optimize; it's not very helpful to note that main() is your longest-running function call. In a real refactor you very well might have the foo->bar sequencing e.g. by seeing that the majority of bar's time is spent calling foo, thus concluding that foo is the "culprit" or otherwise has some low-hanging fruit.

[1] Almost all software I've seen has a tendency to accumulate cruft over time. That isn't a criticism of any individual's abilities, just an observation that the march toward new features tends to invalidate previous assumptions and degrade the project's code quality over time. Moreover, the act of running the previous version teaches things you didn't know when that previous version was written, allowing even the same author to make better informed decisions. If/when somebody decides performance is important, there's almost always an opportunity to delete a ton of code.

[wheelinsupial]

> Doing so misses any state you can't hit via small iterations (you'll find a local minimum rather than global).

When I worked in manufacturing, we distinguished between “continuous improvement,” which were these smaller improvements that will get you to a local minimum, and “radical transformation,” which will get you significant improvements and requires redesign of the entire system.

[llamaimperative]

> Doing so misses any state you can't hit via small iterations

Nothing about this method of problem identification requires small or local improvements to fix issues. In fact it makes it much easier to justify larger scale changes because you can have confidence in the impact it'll have on your total output.

[rudasn]

OK so the cache is the one thing, and the next most expensive "little thing" is the one thing to focus on next?

[Jensson]

But removing the cache makes the system slower, it didn't optimize anything. So no, fixing this isn't possible with that approach, you need to take the holistic approach.

[llamaimperative]

There's nothing about identifying and solving one problem at a time that prevents one from taking a holistic approach.

In fact the entire point is to interpret the behavior of the entire system in order to find the right singular intervention. To find the true globally optimal point of intervention, one must look at the entirety of the system.

[Jensson]

If you are saying that your method includes all methods, then sure being open to consider all methods of making something faster will include the best way to do it. But I thought were were talking about useful advice here, to be useful you have to narrow it down a bit.

[RaftPeople]

> The key insight from Deming’s work is that at any given moment there is only and exactly ONE thing that should be optimized. Once you optimize that, there will be a new SINGLE thing that is now slowing down the entire system, and must be optimized.

Are you sure this is what Deming thought?

A complex system has many different things that can be locally optimized independently, here's an example:

1-DC picking optimization

2-Store inventory placement to align with demand to both increase sales and decrease costs of liquidating old inventory

Both of these have very significant impact on costs or revenue or both, and are largely independent. The process of picking in the DC is independent of the specific selection and inventory levels of skus in the stores.

Why would you not do both at the same time to get the benefits as quickly as possible?