[BubRoss]

The original thread was about nurbs not being used anymore over polygons. Displacement doesn't change the equation between polygons and nurbs of course because they both go in as high level primitives. Hair is a its own thing of course. I know you know this, but I think a lot of people missed the original point.

[dahart]

You keep saying “polygons”. Are you talking about subdivision surfaces? Films don’t model in “polygons”. Subdivision surfaces are a curved surface representation, not “polygons”. Some people still use NURBS too.

[berkut]

Subdivision surfaces end up as curved surfaces when rendered, i.e. an approximation of the limit surface, but the modellers most definitely do model them as polygons in the DCC apps.

Some of the studios still don't even bother with crease weights and still "double-stop" ends with extra vertices/faces to create hard edges.

My original point was that it is possible to render subdivision surfaces without dicing down to micropolygon (i.e. you approximate the limit surface with Gregory Patches or something), but only if you don't have displacement: as soon as you need displacement, you pretty much need to dice down to micropolygons, and in this scenario, the geometry representation can be extremely expensive in memory with large scenes.

[dahart]

> but the modellers most definitely do model them as polygons in the DCC apps.

Yes, right, I know. I phrased that poorly, so I guess I should give BubRoss a break. The point I’m trying to make is that starting with the idea of polygon modeling, and starting with the idea of subdiv modeling, are two different things. If we’re talking about subdiv modeling, they it should be called subdiv modeling. Modeling “polygons” doesn’t just automatically produce decent looking smooth models and good connectivity and UVs, you have to use subdiv tools while you work.

That you can render subdivs without subdividing is related to what I was trying to say, that these surfaces are higher order, have an analytic definition, etc... they’re not just polygons. I guess it’s a good thing that subdivs are so easy to work with that they’re equated with polygons.

[BubRoss]

> Films don’t model in “polygons”

I can promise you they do. They are treated as the same thing. Everyone uses polygons knowing they will be smoothed/subdivided/declared as subdivision surfaces. Sharp edges, cusps and bevels are typically made by creating more subdivisions in the actual model instead of using extra subdiv data on the geometry, though pixar might be the exception.

> Some people still use NURBS too.

I think this is very rare. Maybe blue sky never transitioned away.

[dahart]

Yeah, so you’re talking about subdivs, not just any polygons. Yes you create subdiv geometry using polygon modeling tools, but modeling pure polygon models, e.g., for games, is a different activity. Subdivs are easier than NURBS, it’s true, but they do come with their own whole set of connectivity, workflow, texturing, pipeline, etc. Just saying “polygons” is misleading.

[BubRoss]

> modeling pure polygon models, e.g., for games, is a different activity

It really isn't. I think you want to drive home some distinction, but the vast majority of work flows model straight polygons and the only difference is that they know they are going to be subdivided and smoothed later by the renderer.

You say that there are all sorts of different issues with subdiv surfaces, but it just isn't true. Modelers and texture artists might look at everything smoothed to make sure there aren't any surprises in the interpolation and distortion in the UVs, but everyone deals with the raw polygons.

[dahart]

Yes, exactly, knowing they’ll be smoothed is a big difference, it leads to different choices. Looking at a smoothed surface during the modeling process is an even bigger difference than looking a mesh all the way through. Knowing how they’ll be smoothed is important. What about creases? What if you want a creased edge smoothed and it’s part of two separate mesh groups?

You can subdivide polygons without smoothing them, and people still do polygonal modeling without planning for subdivision, and produce models that aren’t intended for smoothing and wouldn’t smooth nicely, so it is important to be clear in your language that you’re talking about a subdivision surface and not just polygons. Why the resistance to just saying subdivision surface, since that’s really what you’re talking about? I agree with a lot of your points if I replace “polygons” with “subdivision surface”.

My issue with what you said far above is the claim that smoothed surface representations require extra tooling, and you claimed that “polygons” don’t have these issues. The problem with that is that a subdivision surface is a curved surface representation, and it does come with extra tooling. Just because it’s easier than NURBS, and just because you get to use a lot of polygon tools, that does not mean a subdiv workflow is the same thing as a polygon workflow. Hey it’s great if the tools are getting so good that people confuse polygons with subdivs. Nonetheless, a pure polygon workflow can mean things that aren’t compatible with smoothing or subdivs.

[BubRoss]

> What about creases?

Creases are done by just making polygons/bevels/line loops close to the edge that needs to be sharpened.

> What if you want a creased edge smoothed and it’s part of two separate mesh groups?

Mesh groups don't have to mean their polygons don't share vertices and this is one of the reasons why - you need to be able to interpolate the attributes of the vertices, like normals.

> You can subdivide polygons without smoothing them, and people still do polygonal modeling without planning for subdivision, and produce models that aren’t intended for smoothing and wouldn’t smooth nicely, so it is important to be clear in your language that you’re talking about a subdivision surface and not just polygons.

I'm not concerned with what random people do. Professionals just say polygons in general and the workflow is all about working with the polygonal mesh directly. If two people are both making polygonal models and they will save them as .obj files, but one will be smoothed at render time , they don't say they are working with a different type of geometry. Technically there are actually many different ways to smooth polygons.

> My issue with what you said far above is the claim that smoothed surface representations require extra tooling,

No, I explained that nurbs require extra/different tools. Technically if someone (like pixar) were to use extra attributes like edge crease amounts on subdiv surfaces, some tools would need to address that, but that's not on the same level as the difficulty of working with nurbs.

> Nonetheless, a pure polygon workflow can mean things that aren’t compatible with smoothing or subdivs.

I think when you say things like this you are trying to salvage your confusion, but it really doesn't shake down like this. Any mesh can be smoothed and unless you have messed up meshes it works well and no one has an eye.

To recap: nurbs are a nightmare to work with, everyone works with regular polygons that could be saved as an .obj, they get smoothed at render time. Everyone calls them polygons because that is what they are working with and it has been this way literally for decades. Try not worry too much about it.