[gmfawcett]

I have to disagree -- this isn't sleight of hand. The standard definition isn't being violated here, because standard division isn't a total function. The denominator's domain in Hillel's function is a proper superset of the standard domain: when restricted to the standard domain, the two functions are precisely equivalent. Therefore, every standard identity still holds under Hillel.

The hole that he is filling here isn't one that he bored into the standard definition, but a hole that the standard definition already admitted. If something is explicitly undefined, there's nothing mathematically wrong with defining it, as long as the definition doesn't lead to inconsistency.

[throwawaymath]

> If something is explicitly undefined, there's nothing mathematically wrong with defining it, as long as the definition doesn't lead to inconsistency.

The definition does lead to inconsistency...you can't look at the field axioms, observe that 0 has no multiplicative inverse, then proceed to define a special, one-off division rule that doesn't involve multiplicative inverses for that one element. Either your division rule is pathological and breaks a fundamental field property or you've introduced a division rule which is just a syntactical sugar, not a real operation (in the latter case you've introduced confusing notation, not a new division function). Why do you think mathematicians explicitly state that the real field with the augmentation of positive and negative infinity (which allow division by 0) is not a field?

I don't understand why there is so much resistance to this idea in this thread, but the simple fact remains that if you define division by an additive identity (0) in any way, the field containing that unit ceases to be a field. This is because all elements cease to be unique. You can quickly prove that every element is equal to every other element, including (critically) the additive and multiplicative identity elements. Fields are defined by closure under the operations of addition and multiplication, and that closure requires uniqueness of their respective identities. Upend that and your entire field structure breaks down, because all you're left with is a field with a single element 0.

Stating that you've defined division by 0 using a one-off case that permits all other field identities to remain consistent is like saying you've turned the complex field into an ordered field using lexicographic ordering. You haven't, because i admits no ordering, much like 0 admits no multiplicative inverse.

Onlookers reading these comments probably think those of us harping on this point are anal pedants with a mathematical stick up our ass. But this thread is increasingly illustrating my central point, which is that the author shouldn't have tried to justify numerical operation definitions in a programming language using field axioms of all things.

[Dylan16807]

> Onlookers reading these comments probably think those of us harping on this point are anal pedants with a mathematical stick up our ass. But this thread is increasingly illustrating my central point, which is that the author shouldn't have tried to justify numerical operation definitions in a programming language using field axioms of all things.

You can't use your own stubbornness to justify itself.

I'm waiting for you to justify your claim that this extension to division breaks any of the field axioms. pron even made you a nice list of them.

Just name one equation/theorem that the new axiom would break.

I'm completely open to being convinced! But so far you've only given arguments about giving a multiplicative inverse to zero. Everyone agrees on that. It's the wrong argument.

[throwawaymath]

Because a divisor cannot exist unless it is a multiplicative inverse. Therefore 0 is not a divisor.

This is getting to be Kafkaesque...it breaks the field axioms themselves. How many different explanations and external resources do I need to provide in this thread for you to be convinced that this is not a controversial point in modern mathematics? I just explained it in the comment you responded to.

You have exactly two options here.

If you define x/0, that definition must interact with the rest of the definitions and elements of the field. To maintain multiplicative closure (a field axiom!) there must be a unique y element equal to x/0. So tell me how you will define x/0 such that x is not equal to the product of 0 and y. Regardless of what you think the author has shown, the burden of proof is not on me at this point to show that you can't do it, because it follows directly from the field axioms. Trying to impose a one-off bizarro divisor function defined only on {0} is not only mathematically inelegant, it immediately eliminates the uniqueness of all field elements. Therefore your "field" just becomes {0}, and since it lacks a multiplicative identity it ceases to be a field. There is your contradiction. Why don't you tell me how you're going to prove any equation defined over a field that relies on the uniqueness or cancellation properties of fields?

On the other hand, let's say you tell me you want define x/0 so that the definition doesn't interact with any of the field definitions or elements. Then you haven't actually introduced any new operation or definition, you've just designed a notation that looks a lot like division but has no mathematical bearing on the field itself (i.e. absolutely nothing changes, including for 0). That's not a divisor function, it's just a confusing shorthand. You can't just add another axiom to a field and call it a field.

If you believe I'm stubborn, that's fine. I might be a poor teacher! There are ample resources online which will patiently explain this concept in mind numbing detail. It boggles my mind that there are people in this thread still fighting an idea in earnest which has been settled for over a century.

[Dylan16807]

> Because a divisor cannot exist unless it is a multiplicative inverse. Therefore 0 is not a divisor.

So there are two separate issues here. One is whether we can extend the definition of the "/" operator, and the other is whether we call it "division".

I'm not interested in what we call it. I'm interested in the claim that extending "/" will break the field.

The dichotomy you're talking about is wrong. The two options are not "multiplicative inverse" and "does not interact with anything". "1/0 = 0" interacts with plenty! If I make a system where it's an axiom, I can calculate things like "1/0 + 5" or "sqrt(1/0)" or "7/0 + x = 7". I can't use it to cancel out a 0, but I can do a lot with it.

> It boggles my mind that there are people in this thread still fighting an idea in earnest which has been settled for over a century.

Remember, the question is not "should this be an axiom in 'normal' math?", the question is "does this actually conflict with the axioms of a field?"

> You can't just add another axiom to a field and call it a field.

Yes you can. There is an entire hierarchy of algebraic structures. Adding non-conflicting axioms to an X does not make it stop being an X.

[pron]

> you can't look at the field axioms, observe that 0 has no multiplicative inverse, then proceed to define a special, one-off division rule that doesn't involve multiplicative inverses for that one element

Why not? What mathematical axiom does this break?

> Either your division rule is pathological and breaks a fundamental field property

It doesn't, or you could show one here: https://news.ycombinator.com/item?id=17738558

> or you've introduced a division rule which is just a syntactical sugar, not a real operation

Is this math? We define symbols in formal math using axioms. I am not aware of a distinction between "syntactical sugar" and a "real operation."

> Why do you think mathematicians explicitly state that the real field with the augmentation of positive and negative infinity (which allow division by 0) is not a field?

That's simple: because unlike the addition of the axiom ∀x . x/0 = 0, adding positive and/or negative infinity does violate axioms 2, 7 and possibly 11 (depending on the precise axioms introducing the infinities).

> I don't understand why there is so much resistance to this idea in this thread, but the simple fact remains that if you define division by an additive identity (0) in any way, the field containing that unit ceases to be a field.

Because a field is defined by the axioms I've given here (https://news.ycombinator.com/item?id=17738558) and adding division by zero does not violate any of them. If you could show what's violated, as I have for the case of adding infinities and as done in actual math rather than handwaving about it, I assume there would be less resistance. I don't understand your resistance to showing which of the field axioms is violated.

> You can quickly prove that every element is equal to every other element, including (critically) the additive and multiplicative identity elements.

So it should be easy to prove using the theory I provided, which is the common formalization of fields. Don't handwave: write proofs, and to make sure that the proofs aren't based on some vagueness of definitions, write them (at least the results of each step) formally. The formalization is so simple and straightforward that this shouldn't be a problem.

> Stating that you've defined division by 0 using a one-off case that permits all other field identities to remain consistent is like saying you've turned the complex field into an ordered field using lexicographic ordering. You haven't, because i admits no ordering, much like 0 admits no multiplicative inverse.

Stop handwaving. Show which axioms are violated.

[svat]

Consider the following two functions, that we can define for any field F:

• Our first function f(x, y) is defined for all x in F, and all nonzero y in F. That is, the domain of this function f is (F × F\{0}). The definition of this function f is:

f(x, y) = x times the multiplicative inverse of y

(Note that in the definition of f(x,y) we could say "if y≠0", but whether we say it or not the meaning is the same, because the domain of f already requires that y≠0.)

• Our second function g(x, y) is defined for all x in F, and all y in F. That is, the domain of this function g is (F × F). To define this function g, we pick a constant C in F, say C=0 or C=1 (or any C∈F, e.g. C=17 if 17 is an element of our field). And having picked C, the definition of this function g is:

• g(x, y) = x times the multiplicative inverse of y, if y ≠ 0, and C otherwise [that is, g(x, 0) = C].

Note that this function is defined for all (x, y) in F×F, and when y≠0 it agrees with f, i.e. g(x,y) = f(x,y) when y≠0.

Would you agree that both of these are functions, on different domains?

Next, we have the notation x/y. To assign meaning to this notation (and to the word “division”), there are two conventions we could adopt:

• Convention 1: When we say "x/y", we will mean f(x,y) (as defined above) — that is, x * y^{-1}.

• Convention 2: When we say "x/y", we will mean g(x,y) (as defined above).

The point of the post is that we can well adopt Convention 2: with such a definition of "division", all the properties that were true of f (on the domain F×F\{0}) continue to be true of g, except that g is defined on a wider domain.

----------------------------------------------

Now, maybe Convention 2 offends you. Maybe you think there is something very sacred about Convention 1. In all your posts in this thread, you seem to be insisting that "division" or "/" necessarily have to mean Convention 1, and the provided justification for preferring Convention 1 seems circular to me — here are some of your relevant comments, with my comments in [square brackets]:

> Since there is no multiplicative inverse of 0, division by 0 is undefined behavior [This seems to be saying: Because of Convention 1, we cannot adopt Convention 2.]

> Since y = x/0, it follows that the product of y and 0 is equal to x, because division is the inverse of multiplication [Here, your reasoning is "because we adopt Convention 1"]

> in algebraic fields division by x is equivalent to multiplication by 1/x. This is precisely why you cannot have a field that admits division by 0: because 0 has no multiplicative inverse. [Again, you're stating that Convention 1 has to hold, by fiat.]

> If F is a field with elements x, y, then the quotient x/y is equivalent to the product x(1/y). If 0 has no multiplicative inverse, there is no division by 0. The two concepts are one and the same [This is just stating repeatedly that we have to adopt Convention 1.]

> A multiplicative inverse is a division. [This is merely insisting that Convention 1 has to be adopted, not Convention 2]

> divisor cannot exist unless it is a multiplicative inverse [Again, stating Convention 1.]

> you can't look at the field axioms, observe that 0 has no multiplicative inverse, then proceed to define a special, one-off division rule that doesn't involve multiplicative inverses for that one element. [Why not?] ...you've introduced a division rule which is just a syntactical sugar [yes the same is true of Convention 1; what's the problem?]

All these comments, which emphatically insist on Convention 1, seem to ignore the point of the article, which is that Convention 2 has no more mathematical problems than Convention 1, because the function g is no less a “valid” function than the function f.

In mathematics when we use words like “obvious” or insist that something is true because it just has to be true, that's usually a hint that we may need to step back and consider whether what we're saying is really mathematically justified. What we have here is a case of multiple valid definitions that we can adopt, and there's no mathematical reason for not adopting one over the other. (There's a non-mathematical reason, namely “it breaks convention”, but the entire point is that we can break this convention.)

[throwawaymath]

I follow everything you're saying. As I have said many times already, I have no problem with convention 2. But don't use field theory to justify convention 2, because it's mathematically incoherent and unnecessary. I broadly agree - there is no reason to be involving field theory in programming language design.

I don't take issue with division by 0 - you can do that in mathematics just fine! I take issue with defining that division and calling the consequent system a field when it's not a field, and acting as though everyone else is wrong. The author invited this criticism when they loaded in the full formalism of field theory without needing to.

If the author had just stated they wanted to define division by zero that wouldn't be a problem. I have no idea why they felt the need to pull in abstract mathematics. I'm not disagreeing with their point, I'm taking issue with the strange and incorrect way they defended it.

Note that in my top level comment I specifically said, "Mathematics does not give us truths, it gives us consequences." I will happily agree with you that there is usefulness and coherence in a definition of 0. There is no canonical truth about the world regarding that matter. But a direct consequence of defining any division by 0 is that you cease to have an algebraic field.

Therefore, using field theory to defend a system which defines division by 0 doesn't make sense. It's not that the system is "wrong" for some meaning of wrongness. It's that you shouldn't be trying to pigeonhole field theory to make it work, because you don't need to.

[svat]

Glad you follow! But I'm not sure we agree yet, as there's still something puzzling when you say:

> But don't use field theory to justify convention 2, because it's mathematically incoherent

> defining that division and calling the consequent system a field when it's not a field

> a direct consequence of defining any division by 0 is that you cease to have an algebraic field

If you go back to my comment (the one you're replying to), both the functions f and g assume a field F, and they are well-defined functions on F×F\{0} and on F×F respectively. (Do you agree?) For example, F may be the field of real numbers. Forget about the word “division” for a moment: do you think there is something about the function g, that makes F not a field?

To put it differently: I agree with you that it is a direct consequence of defining a multiplicative inverse of 0 that you cease to have an algebraic field. But the only way this statement carries over when we use the word “division”, is if we already adopt Convention 1 (that “division” means the same as “multiplicative inverse”).

Again, I think you are implicitly adopting Convention 1: you're saying something like “if we adopt Convention 2, then x/y means the function g and includes the case when y=0, but [something about multiplicative inverses, implicitly invoking Convention 1], therefore there's a problem". But there's no problem!

It is not a direct consequence of defining the function g(x,y) that something ceases to be a field: it is a consequence only if you also insist on Convention 1, namely if you try to assign a multiplicative inverse to 0 (which everyone here agrees is impossible).

Let me emphasize: whether we adopt Convention 1 or Convention 2, there is no problem; we still have the same field F.