[sudojudo]

Every modern IC engine (and the majority of old ones) operates with a pressurized cooling system; they absolutely will not function properly with a leak.

The average operating temperature of engine coolant is around 200F, the only reason it doesn't boil over is because of the aforementioned pressure, which is usually around 15PSI (bringing the boiling point to just above 250F).

The rating on 50/50 antifreeze relies on coolant system pressure, it (ethylene glycol) will boil like water if put on a stove. The key to antifreeze is in its name: anti-freeze. It does raise the boiling point of water a little, but that's just a side benefit and is of no real significance (plain water transfers heat better).

These readily available facts contradict the comment above. The person is certainly trying to make a point, but they seem to have the fundamentals completely wrong.

[Retric]

200F is only 93C which is below the boiling point. This is very much by design.

Yes, the coolant loop is designed to be operated under pressure, however being able to drive with a coolant leak under sub optimal conditions is very important.

Further, engines are designed to operate at unusually high external temperatures as temperatures up to 134f / 56.7°C have been recorded, though not nessisarily with a leak. Note, road surfaces can be significantly above ambient temperatures.

[sudojudo]

No cars, in the real world, are driving around with significant coolant leaks. End of story. Talk to any repair shop.

That's the crux of my argument. There is no scenario where one can continue to drive a car with a coolant leak. This kills the engine.

Our discussion feels like a mechanic arguing with an engineer. Probably because that's exactly what's happening.