|
|
|
|
|
by rdl
4532 days ago
|
|
Hardware. USB powered. Dual radio, ideally dual dual band (so 4 radios which can be 1-4 in use). Ethernet port. Probably a USB port for 4g. Ideally a good form factor. Probably no battery, use a USB battery or laptop. My goal would be to never ever connect my devices to wifi, and run everything through the device. There are lots of attempts to make current hw work for this, but while you can get close, nothing is good enough IMO. I have the tplink, the belkin, etc with different firmware. Enough flash and ram to run sane openwrt, and maybe options for a VPN client, and a stretch of Tor. Fitting that within the power budget would be the issue. |
|
Yes, it sounds like it will be challenging to fit everything in the power budget. Do you think there's a need to use this on battery power? Won't most people be using it in a hotel room? A wall wart that's compact and dual-voltage would work for me and would provide much more power than USB.
I'll also put in a pitch for at least two Ethernet ports, so you can use one for connecting to the hotel and another for your LAN, in case WIFI's not cutting it or you need to connect a non-WIFI device (in my case, a VoIP phone).
One usability problem which has vexed me is that most hotels force you through a captive portal, which doesn't work if you're routing all traffic over a VPN. (Some even make you do it every 24 hours!) My latest solution is a special Ethernet port that's on a separate subnet which isn't routed over the VPN. You use that for going through the captive portal and then you switch over to WIFI or another Ethernet port. I think a hardware switch to turn the VPN on and off would also be a good solution.