[pallandt]

Yes, this should be on a crowdfunded project asap if the prototype in the video was really functional and no simulated sounds were added. I'd buy it in an instant! Maybe I'll attempt to promote it on Reddit to help with gaining more 'mass-appeal' traction.

[chm]

I'm pretty sure it was CGI.

[darkmighty]

Yes, and there's whether it actually works IRL. I think it's feasible to have something like the concept, but there are quite a few hiccups along the way -- I'm no audio expert, but I suspect that a single microphone/speaker location may be unable to cancel satisfactorily the incoming sound field through the window. Also, Loud noises creep in through various places, so if your window is quite good already you many not get much improvement.

But a good concept and hard work (and hope) usually lead to quite good products...

I.e. noise cancellation in building is usually approached through "get better insulation", not through the plausibly cheaper "let's spread a speaker/mic array inside/outside to cancel what's coming form outside".

[msandford]

I've done quite a bit of signal processing in my day. Audio, image/computer vision, radio comms, etc. This product strikes me as not terribly honest for a few reasons:

Geometry

The mic/speaker assembly are in the middle of the window but the window has substantial size relative to the dimensions of the room and the distance the listener is from the device. What this means is that you have a multipath problem; the original sound can come through the whole window (even the wall!) but the canceling sound can only eminate from the speaker.

If you draw a straight line from the original noise source, through the device and from there it happens to head towards your ears, this can work. If not things will get jumbled up and it might cancel or it might actually reinforce the noise, rather than cancelling it.

http://en.wikipedia.org/wiki/Loudspeaker#Directivity

Physics

A speaker is a device that works as a derivative of the original signal. That means it needs some amount of "advance notice" of the sound in order to be able to create the proper pressure wave to cancel out said sound. The "advance notice" is usually done by means of some distance between the microphone and the speaker but the device is very thin. Worse, the amount of "advance notice" depends on the frequency of the sound which generally makes it an intractable problem to solve for the transient case.

http://www.customanalogue.com/elsinore/elsinore_19.htm

So what people do is focus on periodic noises like hum, hiss, buzz, rumble, what-have-you. In this case you don't need to make sure that any one peak has it's inverse reproduced perfectly, you only have to ensure that ONE peak is cancelled out by SOME OTHER out of phase peak. If it takes a couple of cycles for the computer to catch on, no big deal that's just a bit of start-up noise. Bose headphones don't IMMEDIATELY make the plane quieter, they just do it so fast that you don't notice the amount of time it takes for the system to warm up. It seems instant even though it's not.

But what this means is that a bunch of the sounds being cancelled out probably wouldn't be cancelled out quite so nicely as a lot of them are transients like the bottles breaking or the construction site or the park.

I'd really love to be wrong about this. There's a joke that goes "An engineer will tell you it's impossible until you show him how to do it. Then he'll say it's obvious." It's entirely possible that this guy has figured something out that the rest of us haven't. But I will remain skeptical until I can actually put my hands on one and benchmark it for myself

[dustcoin]

    The mic/speaker assembly are in the middle of the window
    but the window has substantial size relative to the
    dimensions of the room and the distance the listener is
    from the device.

For what it's worth, the pictures in the article show a series of rings around the device that significantly increase its surface area, a component that is not present on the device in the video.

[msandford]

Yeah I'm not optimistic about those. They're clearly too small to be electromagnetic drivers (think magnets and coils) so best-case they're active piezo devices that are epoxied on (need to have a good bond) turning the whole window into a radiative speaker. Sadly those are limited to high frequency sound only (several kHz and up) so they wouldn't do much good for anything other than perhaps the bottle noise.

http://en.wikipedia.org/wiki/Loudspeaker#Piezoelectric_speak...

[CamperBob2]

Agreed 100%. This is a murderously difficult problem, so claims of miracles need to be received with some skepticism.

[pallandt]

Damn, I should've known it was too good to be true. I did wonder though how come a corporation hadn't invented it yet though.