| I run 2 x 30" (2560x1440) and 1 21"(1920x1200) IPS monitors (all DVI). I have 3 Samsung 540 256GB SSD, 2 WD RED 7200RPM 3TB drives (with lifetime warranty!) in the slots. 1. You should probably jump up to 750W PSU (Which is what I did in the end) just for a little more wiggle room. I also moved to small footprint RAM to fit under my cooler -- 4 x 8GB sticks. 2. Use Clover not Chameleon as your bootloader. It's EFI emulation is much better and will give a better OOTB experience (less fiddling with Kexts) 3. You might want to use a different mobo, the Realtec989 can behave strangely under OSX (popping / random interrupts) but this only happened on one install for me and a fresh install cleared it up. 4. Win7 will not install if the drive isn't device 1 or if there are HFS drives around (I have no idea why, seeing as it installs fine on my MBP -- there must be some EFI magic). 5. Fuck any SSD not made by Intel or Samsung -- make sure to use one of the Trim Enablers on the OSX side of things. 6. Don't OC the graphics card unless you're prepared to do some debugging under all OSes you plan on running. 7. OC in increments for the CPU -- test under all OSes before ratcheting up 8. Don't use Win8 with HFS drives, it does stupid shit to their metadata and headers. 9. I didn't bother setting up WiFi since my apartment is wired, but it shouldn't be too hard. Use the included wireless card and there are drivers out there that are confirmed to work. |
I thought Reds were ~5400 RPM ("Intellipower") with a three year warranty.