[ssl-3]

I did some research on weird inkjet printers a few years ago. We wanted to do stuff like print white[1] graphics continuously onto rolls of black heat shrink tubing.

One thing I discovered was that there's whole Chinese industries supplying this stuff in the forms of industrial printers and the application-specific cartridges they consume. And they all had one thing in common: They were based around the functionality of an HP printer cartridge. That was the universal interface.

This leads me to believe that a print cartridge format can be supported by the marketplace for a very long time whether HP likes it or not.

[1]: Printing with white is neat. It sounds impossible and there are those who say it can't happen, but it exists. It's just problematic. The head gets perma-clogged with solids within minutes of disuse in open air. So starting a print job is a race: Get everything set up, uncap the cartridge at the last moment, and then put that cap back on ASAP when the job is over.

[saturn8601]

Are you referring to the numerous Chinese UV printers?

>The head gets perma-clogged with solids within minutes of disuse in open air. So starting a print job is a race: Get everything set up, uncap the cartridge at the last moment, and then put that cap back on ASAP when the job is over

Decades ago I helped manage a local's school IT systems and we had these Epson C84 printers that used a very photo grade ink. The printheads would clog after a year of teachers printing like 1 document in that year. During that time it seemed like regular purging of ink regardless of print or not was what kept the printheads going. Strategies used by third party repair firms included submerging the head in a cleaner to dissolve the ink on the outside, connecting pipes with the same fluid to the inputs of the top to the printhead and then finally pulling pressure to try and dislodge the material through the head. Due to the non removable design of the Epson print heads, my attempts at trying this would destroy many printheads. I'd like to think this would be a solved problem in 2026. In your case why not run a purge liquid the printhead after each print? The printhead could then be primed with fresh ink each time.

[ssl-3]

I don't know what a UV printer is. :)

We were using fixed-head printers that we found at the bottom of a deep rabbit hole. The work moved through the machine while the printy-bits remained stationary. We were doing this with HP-style monochromatic carts that came loaded with high-solids "ink" (closer to paint, really) that used opaque white pigment.

Unlike Epson's ecosystem, HP carts most-commonly come as assemblies, with a new print head included in the same disposable cartridge as the ink is. The only connection between the carts and the rest of the printer is electrical; there's no plumbing or functional fluids that are external to the carts.

This self-contained nature means that when ink runs out or heads gets clogged, replacement of everything involved with fluids is fast and easy. Production can continue immediately.

It's not problematic at all...other than being expensive. :)