[zonkerdonker]

Very cool project and video documentation, really inspiring! As someone who is mechanically inclined and has a decent amount of tools/3D printer, is there any DIY telescope that you would recommend to build as a first foray into the field?

I've never done much with optics, and after reading through a few of your posts, it looks both incredibly challenging and very rewarding.

[chantepierre]

To me, there are two models that stand out from the crowd :

- The Hadley, a 4"1/2 f/9 dobsonian telescope, which is a smaller aperture but easy to build and to find optics for, and very mature : https://www.printables.com/model/224383-astronomical-telesco...

- The "open smallest telescope" from a friend, which I show here, a foldable 6inch f5 dobsonian : https://lucassifoni.info/blog/2025-best-6-inch-f5-150-750-po... and can be found on Printables : https://www.printables.com/model/1325533-ost-open-smallest-t...

Both are very cool projects, the smallest shows more for deep sky but costs a bit more in optics, and the Hadley has a very mature community.

[zonkerdonker]

I will check them out! Thanks for sharing

[bluGill]

How into this will you get? If you just want to make your own a small telescope is easiest (see the other reply). As things get large expenses go up. Commercial lens are cheap for smaller telescopes, but as you get to large that becomes the cost and so making your own is the only way you can afford it. If you want a large telescope you should again start making a small one, but this time making your own lens - even though it isn't cost effective to make your own lens (vs buy), the experience means you have a chance to make a larger one (and finish, most people who set out to make one large telescope never finish, those set out to make a small and then a large are more likely to finish both).

If you just want to see the stars, goodwill often has telescopes cheap. A refactor can see more than your eye. (or even the binoculars you likely already have!). And the bigger reflectors are seen once in a while.

[GloriousKoji]

I built a Hadley 114 over the course of 3 weekends and I highly enjoyed it. Amazon has a convenient 2 piece mirror kit you can buy. The rest of the parts (springs, screws, rods) can be acquired anywhere and the stand can be as complex or as simple as you want.

[giantg2]

Just go down the rabbit hole like I have over the past year...

Find thick glass on Facebook, build a cutting jig, build a kiln to fuse it, etc. I'm still planning to build an 18".

[chantepierre]

Very nice, are you documenting this somewhere ?

[giantg2]

No, it's nothing new. There are other projects that have documented these types of things better than I could.