[BozeWolf]

Is it worth the upgrade to 3.x? I have the mk3s for years now and I love it. No issues at all. Bought it after I finished my freelance job at Ultimaker, as I had to return my S3. I wanted a premium experience, which prusa sure has. Considering upgrading the 3 or buy a new prusa core something something.

Second hand market for prusa printers is decent as well.

[VorpalWay]

Mk3s is indeed great. I tend to swap nozzle often (different sizes, hardened vs brass) and the Nextruder makes that way easier. I also don't have a space where I can print overnight so the additional speed was extremely useful to me.

The Mk3.9 probably isn't a price competitive upgrade though, today I would in your position probably look at selling the Mk3s for 100-200 EUR and buying a Core One instead. But if the Mk3s works for what you are doing, then don't bother. (The Mk3.5 might make some sense if you only want a bit higher speed and network connectivity.)

Personally I don't see myself replacing the Mk3.9s for a long time, though an enclosed printer would be nice and let me print warp-prone materials like PC and ASA.

[BozeWolf]

Thanks!! Speed indeed would be nice. Could go for 3.5 then. the enclosure looks better and keeps dust away from the buildplate. I think i will eventually go with core one then.

[VorpalWay]

I'm not sure if a 3.5 will be as fast as a 3.9. You could enable printers you are interested in in the slicer and slice some typical models of yours.

Because of things like acceleration and flow limits the scaling isn't as simple as a constant factor but also depends on the geometry of the part (sharp corners lead to slowing down) and material (check max volumetric flow in your slicer, will likely be set way too low for your current filament profiles, especially if you switch to a high flow nozzle on the nextruder).