[nodesocket]

I have a homelab with 4x Raspberry Pi 4's running Kubernetes a GMKtec Intel i5-12450H and a ProLiant ML350p Gen8 (which uses an ungodly amount of power). I'd add the following software/tools which have been awesome:

  - Portainer running on GMKtec & ProLiant
  - Dozzle (docker log viewer) on GMKtec & ProLiant
  - Beszel (server monitoring, awesome) all hosts
  - Kubetail (Kubernetes log viewer on Pi K8s)
  - HomeAssistant
  - Jellyfin
  - UptimeKuma (uptime and notifications)
  - Semaphore UI (ansible playbook runner)
  - Metabase (querying and visualization for dbs)

[mrmlz]

I've recently upgraded my ageing X8SIL Supermicro with an i5 to a X10 Sm board with a 2960 V4 14core Xeon... I was expecting a horrible power situation but it's less than 100w with a handful of spinning disks etc.

I see lots of people complaining on power with their re-used ProLiant and others etc. Is it the throttling or bios settings that messes with the idle power?

Or are you just running it at 100% and my low usage is what saves my electricity bill?

[nodesocket]

I'm at about 150 watts at idle with 2x Intel E5-2640 with 8x drives. I've gone through the BIOS pretty thoroughly and optimized as much as possible.

[mrmlz]

Ah okay 150w is not _that_ bad - more than a rpi for sure but still :)

And another cpu+chipset is always going to eat som Watts just by existing.