[marcus_holmes]

I'm a total noob on this.

I get that vacuum is a really good insulator, which is why we use it to insulate our drinks bottles. So disposing of the heat is a problem.

Can't we use it, though? Like, I dunno, to take a really stupid example: boil water and run a turbine with the waste heat? Convert some of it back to electricity?

[jdyer9]

It's a good question, but in a closed system (like you have in space) the heat from the turbine loop has to go somewhere in order to make it useful. Let's say you have a coolant loop for the gpus (maybe glycol). You take the hot glycol, run it through your heat exchanger and heat up your cool, pressurized ammonia. The ammonia gets hot (and now the glycol is cool, send it back). You then take the ammonia and send it through the turbine and it evaporates as it expands and loses pressure to spin the turbine. But now what? You have warm, vaporized, low pressure ammonia, and now you need to cool it down to start over. Once it's cool you can pressurize it again so you can heat it up to use again, but you have to cool it, and that's the crux of the issue.

The problem is essentially that everything you do releases waste heat, so you either reject it, or everything continues to heat up until something breaks. Developing useful work from that heat only helps if it helps reject it, but it's more efficient to reject it immediately.

A better, more direct way to think about this might be to look at the Seebeck effect. If you have a giant radiator, you could put a Peltier module between it and you GPU cooling loop and generate a little electricity, but that would necessarily also create some waste heat, so you're better off cooling the GPU directly.

[marcus_holmes]

Thanks for the response :)

I think I get it. If we could convert 100% of the waste heat into useful power, then all good. And that would get interesting because it would effectively become "free" compute - you'd put enough power into the system to start it, and then it could continue running on its own waste heat. A perpetual motion machine but for computing.

But we can't do that, because physics. Everything we could do to generate useful energy from waste heat also generates some waste heat that cannot be captured by that same process. So there will always be some waste heat that can't be converted to useful energy, which needs to be ejected or it accumulates and everything melts.

[Someone]

What do you do with the steam afterwards? If you eject it, you have to bring lots of it with your spacecraft, and that costs serious money. If you let it condensate to get water again, all you did is moving some heat inside the spacecraft, almost certainly creating even more heat when doing that.

[mike_hearn]

You can't easily use low grade heat.

However there are workarounds. People are talking like the only radiator design is the one on the ISS. There are other ways to build radiators. It's all about surface area. One way is to heat up a liquid and then spray it openly into space on a level trajectory towards a collecting dish. Because the liquid is now lots of tiny droplets the surface area is huge, so they can radiate a lot of heat. You don't need a large amount of material as long as you can scoop up the droplets the other end of the "pipe" and avoid wasting too much. Maybe small amounts of loss are OK if you have an automated space robot that goes around docking with them and topping them up again.

[ikr678]

Harder to direct waste heat in space if you dont have gravity for convection.