[cenamus]

Good question, probably depends a lot on how much energy actually makes it to the target some distance away. And then how much is actually absorbed. Probably depends more on the power density then, rather than total power?

Can't imagine they get a very small spot at multiple km unless they use gigantic lenses or multiple independent laser focused on the same spot

[margalabargala]

I also wonder the extent to which the effectiveness is reduced by painting the projectile white or wrapping it in aluminum foil. Maybe 100kw is so large that it simply does not matter at that power level.

[simondotau]

I imagine that it depends greatly on the laser’s spectrum. Aluminium is a good reflector of infrared but not ultraviolet, for example.

[JumpCrisscross]

Maybe it involves multiple converging beams to reduce transmission losses?

[tguvot]

yes it does

[condensedcrab]

Even small divergence angles add up if they’re trying to intercept at visual ranges outside of traditional munitions.

That being said, probably ~10kW/m^2 is enough to overheat or disable a UAV

[chmod775]

It'll get a lot of time to react at that energy as it's not going to "instantly" fry anything*. That's probably less energy/m2 than consumer heat guns, especially if consider that these drones are likely going to get sprayed in reflective paint. Easy defense for the drone would be just: get into a spin to get roasted evenly -> shut off -> fall for a few hundred meters, cooling using air that rushes by to counteract the laser further -> catch itself once it lost the laser.

That would force these laser systems to point each drone until it either visibly goes up in flames or impacts the ground (which means you also need to be able to track them all the way down), otherwise you can't be sure it won't just snap back to life once you started engaging the next drone.

I don't feel like 10kw/m2 would be anywhere near useful. It's gotta be more than that.

* Stadium floodlights aren't going to instantly grill any bird that flies in front of them either, and they reach that ballpark.

[cenamus]

Yeah 10kW/m2 isn't much more than than sunlight, which is around 1000-1300 W/m2 depending on conditions.

If you can target it for a couple seconds with that power then you're not gonna do much, much less if it's not very absorbent