[bb88]

I'm not OP, but there's a lot of criticism of meshtastic from people knowledgable about mesh networks. I also have been critical of meshtastic on this site.

Here's an example of a good criticism: https://www.zeroretries.org/p/zero-retries-0215

I have no experience with the community, but if they couldn't have been bothered with understanding AlohaNet from several decades previous, than maybe it's not surprising.

I myself have been fairly critical of meshtastic, you can probably search for bb88 and meshtastic to find more criticisms.

To save you some time, I live in a fairly populous city with a bunch of meshtastic nodes, and can't get a message accross from me to my friend who lives one hop away.

[wtallis]

It's not clear to me which portions of that very long newsletter are responding specifically to Meshtastic, but it seems like the most relevant section starts by listing some challenges but offers nothing in the way of solutions except to digress into talking about a wildly different class of radio hardware (SDRs that can monitor many channels at once).

[bb88]

So you mean other than these sections right?

"Thought experiments about mesh networking"

"Hard Lessons Learned -- What not to do"

"Meshtastic Is Rediscovering Lessons (Already Learned) of Amateur Radio Data Networking"

Instead of actually trying to understand the arguments these days, it's easier to inject noise into the argument, proclaiming it's too "hard to find" or "too hard to understand."

Mesh networking is a hard topic. Expect to expend some brain cells to understand it. I'm not here to spoon feed you tech that was well understood 3 decades ago.

[wtallis]

How about you make an actual argument here in this thread, instead of vaguely gesturing at an excessively long newsletter and claiming there's relevant substance in there somewhere? Or at least tell me if I've incorrectly interpreted the "Meshtastic Is Rediscovering Lessons (Already Learned) of Amateur Radio Data Networking" section as listing problems but no solutions aside from buying a radically different (more expensive and power-hungry) type of radio?

Try making some specific suggestions for what Meshtastic is doing wrong that could be done differently. That way, we can tell whether your beef is with the Meshtastic software and protocol, or with their choice of LoRa radio hardware, or if you're just trying to preach about your ideal mesh network design with unstated assumptions about the priorities and constraints of such a network.

[hedgehog]

FWIW I have some background in this area and got curious how Meshtastic works so I read some of the docs and code. It seems like they are unaware of existing work even 20+ years ago, a specific suggestion is to study the state of single radio CSMA meshes in say 2005 and make a list of subjects to read on, then do that. There's a lot of stuff that happened later but in the early 2000s many people tried to make meshes out of 802.11b IBSS and a lot got written about those efforts.

[immibis]

All the information you seek is found in the article you stubbornly refuse to read.

[Groxx]

having read that meshtastic section: I mostly agree with their requests tbh. the only suggestions in there seem to be "use full duplex" (with approximately one reason why, though it's a good one) and "solve frequency discovery with SDR" which they've already addressed as somewhat ridiculous - because it is, for someone interested in a low power and low cost network.

particularly the SDR stuff, which is the VAST majority of that section. this is not at all the same target audience as meshtastic:

>A computer with “sufficient” compute power and RAM, to run the ka9q-radio software. KA9Q has stated that a Raspberry Pi 4 is sufficient, and now we have the Raspberry Pi 5 with up to 16 GB of RAM, for only $120.

that's like suggesting the way to fix a wireless problem is to use a wire. otherwise the criticism seems to summarize as "it's slow and bad" and well. okay? that's hardly constructive, whether or not it's accurate.

the whole thing reads like "the solution is left as an exercise to the reader ;)" because it sounds like it's written by and for people who are already experts and just want to read a cathartic list of flaws they already know. and/or "buy better hardware lol". it's not at all the logical slam-dunk that you seem to think it is.

[bb88]

Meshtastic can only use one frequency at a time. So, say, a battery status update can stomp on a message trying to get to a meshtastic router. (He's got the link to the hidden node problem with a great wikipedia article about it).

The more popular the network, the more frequent these message stomps happen. Flood routing makes these stomps more frequent.

There is also no end to end packet acknowledgement system like tcp, so at hop 3 (e.g.) if the message got stomped on, who would know?

Let's say someone made a dual band lora transceiver. Well that would help, but it wouldn't solve anything else, because there's still core routing/reliability/topology issues.

So if you had 20 channels to talk over, well that would be even better. The chance of having your message stomped on would go down significantly making the network much more reliable. That's the SDR part (the listening of 20 channels at once) vs the Lora chip which can only listen/transmit on 1 channel at once.

Edited to add:

"But that's super expensive hardware/engineering to do that!" you might say. Well, it's being done today.

The point is that if you can fit 20 1khz channels in a 20khz RF space. The 20khz RF can be converted into audio and fed into a soundcard and processed. This exists today with FT-8, though FT-8 uses 150hz bandwidth per stream in 2.8khz sections per band.

You can see some FT-8 activity by looking at some websdrs.

Maybe go here and tune to 14.074Mhz Upper Side Band (USB)

http://data3.caprockweather.com:8073/

Each vertical line is one message 150hz wide.

[mtlynch]

I've been spending a lot of time experimenting with and learning about Meshtastic and MeshCore recently,[0] and I'm also puzzled by the criticism of Meshtastic.

In the article you linked, there are three paragraphs about Meshtastic in a 150-paragraph newsletter about several topics. The criticism seems to be that they they use digipeating, and then it refers to a Fedi thread[1] which is more coherent but still fairly vague. The upshot seems to be that flood routing doesn't scale, which is a fair criticism but feels disproportionate to the level of vitriol against the project.

The Fedi thread also adds that the Meshtastic founders were rude or unprofessional to him but doesn't cite any specifics or evidence.

I see this a lot with Meshtastic. People keep saying the founders are toxic and disrespectful of the community but it's always in these vague terms so I don't know what's driving it.

But specifically in this thread, I agree with sibling poster that you're being disrespectful and arguing ineffectively by pointing to such poor resources and then blaming other people for being unconvinced or confused.

[0] https://mtlynch.io/first-impressions-of-meshcore/

[1] https://partyon.xyz/@nullagent/113861754522594610

[threemux]

As I understand it, the section on "what not to do" features many things that Meshtastic does, though it does not say that explicitly. Perhaps the linked post wasn't clear to non hams (it is a newsletter targeted at hams), but the biggest issue is not flood routing, but using the same channel for networking and user access. It, by definition, cannot scale meaningfully. Many commercial networks solve this with either FDMA or TDMA.

Elsewhere in the newsletter, the author advocates for a form of FDMA, where users operate on different, dynamically allocated frequencies and all of them are received at once. P25 trunked radios used by almost all law enforcement in the US operate on a system like this.

I think the vitriol from those who are in the space either professionally or as an amateur comes from the fact Meshtastic is repeating mistakes we knew about in the 80s at the latest, for which reams if literature freely exists.

[wtallis]

That's a reasonable take to an extent, but underlying all of that is the assumption that Meshtastic should be trying to scale up to support hundreds or thousands of active nodes on a single mesh. Since that's clearly almost impossible to achieve with an ad-hoc network of low-power LoRa radios, it's not entirely fair to criticize Meshtastic for not inventing a revolutionary solution to a very hard problem.

It would be more fair to criticize Meshtastic for not being clear enough about the tradeoffs and limitations inherent in a low-speed ad-hoc mesh network, and for not actively encouraging people to seek other hardware and software if their use cases are not well-matched to what Meshtastic hardware is capable of. A one size fits all solution simply isn't possible, and Meshtastic can't be the right answer for everyone.

[threemux]

This is also a fair response, however I'd argue that the current architecture, far from supporting hundreds or thousands, won't even support dozens in a small area with meaningful traffic being exchanged (e.g., not just heartbeats and routing data). The solutions exist and no revolutionary approach is needed. That's the crux of the complaints.

Now, for the hobbyist these solutions are harder to implement and that's not nothing, but I don't even see a movement to switch over to something more robust.

[mtlynch]

Thanks! I appreciate your more accessible explanation.

[howcutend]

How cute that you’re “puzzled”. Cool story bro.

Have YOU ever tried interacting with the developers? No?

* They made incredibly poorly designed software — the firmware and the mobile apps — and then yell at you for “using it wrong” * The refuse to admit they made a mistake with the 7 hop limit and call you an idiot for not believing in their garbage “simulator” * They write nasty responses to app reviews and GitHub issues because they’re petulant children. Just go read the responses, and look at the hissyfit the of the primary app developer in discord. * They’ve taken down multiple community groups because they decided they needed to be a business rather than an open-source project. Seriously just go look at the history in their discord #trademark channel. They’re on the verge of evil.

All this stuff is available and just because YOU choose to put your head in the sand doesn’t mean it didn’t happen.

[mtlynch]

> Have YOU ever tried interacting with the developers? No?

I have. I emailed them a couple of weeks ago and they responded promptly and professionally.

> All this stuff is available and just because YOU choose to put your head in the sand doesn’t mean it didn’t happen.

You want me to read thousands of GitHub issue comments and discord messages in search of bad behavior?

If you have examples of the Meshtastic team behaving badly, why not link to them? The burden of proof is on you, not me.

I don't have a dog in this fight. I think LoRa messaging is neat but I have no investment or relationship with Meshtastic in particular.

[mikeytown2]

Here's an example of an issue they didn't like getting deleted https://github.com/meshcore-dev/MeshCore/issues/1159