[cycomanic]

I did my PhD on fibre lasers, 0.1 DB would have been considered a ver bad splice and I would have recut and respliced (if you have 1-10W in your cavity that 0.1 dB loss would risk burning and the fuse propagating through your cavity destroying everything in its path (as a side not look up Videos of fibre fuse, looks fascinating). In my experience 0.01-0.02 is much more typical than 0.1 dB loss.

[matt-p]

I’m speaking mainly within the context of telecom field splicing - the numbers I mentioned are typical for that application in my experience. You’re only sending on the order of 5 mW down a fiber, so none of those high-power concerns apply. Obviously, different networks have different thresholds: if you’re building a greenfield, low-latency long-haul route, you want to minimize loss and it’s reasonable to spend the extra time and use higher-end equipment. For FTTH, with something like a 30 dB overall budget, nobody really cares whether a splice is 0.03 dB or 0.1 dB.

[Hikikomori]

You might accept a bad splice but you'd almost have to fuck it up on purpose with a decent automatic splicer.