[fuzzfactor]

Actually not that many types of things will bind to the carbon permanently, mostly it's the affinity for such a wide variety of contaminants to the carbon, combined with the porosity of the carbon structure which can have a very impressive amount of surface area to come in contact with the fluid being filtered. Whether filtering air or water. It hangs onto contaminants tightly.

Because carbon is such an effective adsorbent for contaminants, the partitioning coefficient for contaminants to remain in the solvent being filtered is lowered quite dramatically compared to so many other kinds of affordable alternative filtration media.

Most times people do need to afford to discard the carbon eventually, but it doesn't even really absorb contaminants like it's supposed to unless it is activated carbon to a good degree.

Activation only means that is it porous enough to begin with so it has enough surface area to be effective, then it is heated with adequate air exchange to about 250 Celsius for as many hours as it takes for virtually all of the VOC's or moisture it may have accumulated to be baked out. Then sealed up tightly, otherwise it can sit around for ages and gradually become saturated passively with any contaminants or humidity admitted through leaks to the ambient environment.

Sometimes, you can reactivate almost indefinitely to keep reusing the same carbon, and it works with VOCs because by their volatile nature they are basically baked back out easily and virtually completely each time. Different amounts of time if using different temperatures though, if equipped.

The stronger the activation, the more tightly with higher capacity the carbon wants to absorb things it encounters that are dissimilar to the fluid being filtered.