|
|
|
|
|
|
by victorhooi
275 days ago
|
|
|
Oh wow - would love to know what you got for sharpening, or what you'd suggest for the home cook? When you say ugly/clunky - I'm guessing you mean it's a bit heavier, or the weight will be off compared to a good high-end chef's knife? (I don't have anything like that, haha). I did note on their FAQ they say to never activate the blade whilst sharpening: https://seattleultrasonics-ceizljlxnpt.gorgias.help/en-US/ho... > Do not activate the ultrasonics during sharpening - this can damage both the blade and your sharpening stones, as the ultrasonic movement is too aggressive and not evenly distributed across the entire cutting edge. Also, reshaping the blade to a different belly curvature or tip shape can cause it to fall out of tune, so avoid removing more material than you would during normal sharpening. |
|
|
The only thing you really need to keep kitchen knives sharp is the habit of sharpening them. That said I've been using this recently for utility sharpening - https://worksharptools.com/products/precision-adjust-knife-s...
It's a bit clunky but I tend to obsess over the angle of the grind, and something that physically constrains that is going to allow me to enjoy the process. For general purpose sharpening you don't need much more than a coarse stone (320 grit) and a honing steel. The coarse stone will bring the edge back (learn how to feel for the burr) and regular use of the steel will keep it in good cutting shape until it wears down. You might not get hair-popping razor sharpness, but that's a fairly short-lived state with kitchen knives unless you do a lot of maintenance.