[wahern]

For the curious,

> When a 100G NIC is fully utilized with 64B packets and 20B Ethernet overhead, a new packet arrives every 6.72 nanoseconds on average. If any component on the packet path takes longer than this time to process the individual packet, a packet loss occurs. For a core running at 3GHz, 6.72 nanoseconds only accounts for 20 clock cycles, while the DRAM latency is 5-10 times higher, on average. This is the main bottleneck of the traditional DMA approach.

> The Intel® DDIO technology in Intel® Xeon® processors eliminates this bottleneck. Intel® DDIO technology allows PCIe devices to perform read and write operations directly to and from the L3 cache, or the last level cache (LLC).

https://www.intel.com/content/www/us/en/docs/vtune-profiler/...

[mrlongroots]

From a response elsewhere in this thread (my current understanding, could be wrong):

> You can temporarily stream directly to the L3 cache with DDIO, but as it fills out the cache will get flushed back to the main memory anyway and you will ultimately be memory-bound. I don't think there is some way to do some non-temporal magic here that circumvents main memory entirely.

[wahern]

Ah. I guess it's only useful for an optimized router/firewall or network storage appliance, perhaps with a bespoke stack carefully tuned to quickly process and then hand the data back to the controller (via DDIO) before it flushes.

EDIT: Here's an interesting writeup about trying to make use of it with FreeBSD+netmap+ipfw: https://adrianchadd.blogspot.com/2015/04/intel-ddio-llc-cach... So it can work as advertised, it's just very constraining, requiring careful tuning if not outright rearchitecting your processing pipeline with the constraints in mind.