Hacker News new | ask | show | jobs
by jonnycowboy 5026 days ago
I'd like to add, I love the controller design. That alone must be worth a couple of hundred ;) Does it use bluetooth? I hope it is not a standard RC transmitter because they can get jammed fairly easily (leading to injury and death, etc etc) even on the new(ish) frequency-hopping 2.4Ghz models.

PS. are you hiring ? ;)
1 comments
eurleif 5026 days ago
>they can get jammed fairly easily (leading to injury and death, etc etc)

Wouldn't a failsafe that activated the brakes if contact with the remote were lost pretty much avoid any serious problems? I don't think getting rear-ended should be much of a concern, since the maximum speed is 20 MPH, and cars will (hopefully) be careful behind someone on a skateboard in general.

link
andrewjshults 5026 days ago
Sudden deceleration (or acceleration) is probably the last thing you want if the remote disconnects. I'd guess some audible alarm letting you know the remote is no longer functioning + disconnecting the drive system (motors and brakes) so it functions as a regular skateboard would be the safest way to handle that issue.
link
eurleif 5026 days ago
That might be less than ideal if you were going downhill. Or if you had accelerated to maximum speed, were heading toward an intersection, and planned to hit the brakes before you got there.
link
exDM69 5025 days ago
I speak from (literally) painful experience. You do not want to have a board decelerating under you, especially when going down hill. If you do not have a decent foot braking technique, you should not ride longboards downhill. Foot braking is (IMO) the most difficult part of longboarding and very easy to screw up, sometimes it's better to try to stay on the board than even attempt braking.

A very slow brake application might be fine, but there has to be an alarm to the rider before that.

Longboards are very dangerous. Usually it's fear and inadequate kicking technique that keeps you from going too fast. I hope that people riding these boards will learn breaking do not rely solely on the engines.

link
vacri 5025 days ago
Perhaps it also has a weight switch - no weight detected on the board for a second or two and it powers down?
link