Hacker News new | ask | show | jobs
by LargoLasskhyfv 296 days ago
One does not do it like that. There needs to be a hardware video signal upscaler in between. Of which many different versions at different capability and price points exist.

Short intro here https://www.retrorgb.com/upscalers.html , be prepared for endless ramblings of what is best why for what in countless other places.
2 comments
detourdog 295 days ago
I have a 90’s era Faroudja line doubler analog components and the size of a VCR.

Looks like this https://www.ukaudiomart.com/details/649142996-faroudja-vp250...

link
mhall 295 days ago
My first job out of uni in the mid 2000s was working on line doubling and film mode detection for Imagination Technologies (makers of the graphics chip in the Dreamcast). Faroudja was our benchmark!

Felt like a real baller with a giant HDTV on my desk, but less fun was watching test scenes from Titanic at 1FPS over and over.

link
LargoLasskhyfv 295 days ago
Wow :) I got a 18 inch office-display by Fujitsu-Siemens with S-PVA panel, long ago.

Broke down after a long time. Repaired it by resoldering some simple capacitors.

During the repair I had a look at the chips. One (or two?)had that Faroudja label on it.

At the time I didn't know about that, and just wondered WTF is that? Searched the net and "got it". They meanwhile got bought up by someone, Wiki as of now says STMicroelectronics. https://en.wikipedia.org/wiki/Faroudja

That display is still working but mostly gathering dust, some 8800 km away from me, atop a 4x kvm, managing some old stuff, also gathering dust :)

link
mjg59 296 days ago
Laserdisc will output 480i rather than 240p (it's just an encoding of the NTSC signal) and lag isn't really an issue, and the linked page doesn't really cover the other advantages. I can imagine that a TV's scaler isn't optimised for composite signals (or even ingesting and filtering the composite signals in the first place), but also laserdisc is just going to look kind of bad compared to modern formats even under the best of circumstances. Even back in the 90s, when encoders were at their worst, DVD was considered a meaningful step up from laserdisc.
link
LargoLasskhyfv 295 days ago
My link has a link to 240p, which also goes into 480i.

That aside, all that stuff was made for CRT technology, with dot/slit masks, and phospors with varying intensity of afterglow. Bigger computer CRT screens worked similar in principle, just not interlaced(mostly), and higher resolutions.

What they both have in common is resolution independency within their technical limits.

Flat displays of today don't have that, no matter which panel technology they are based on.

Their internal upscalers may compensate for the resolution, but not for the effects of phosphor, and it's afterglow, after the beam raced over them, until its hitting them again, through the mask.

There is a reason that hardware stuff exists, more so than much so called 'audiophile' stuff, though it's still 'niche'. Once you have seen it in direct comparison, with, or without, you'll know.

Or you've been lucky, and have a really good screen.

Or bad eyesight/perception, not noticing the difference. ^^^^ Not meant to be condescending, but I've seen that IRL.

link