[jcims]

I built a small two axis direct-drive mount (https://mjbots.com/ controllers are great) to track satellites and aircraft with an RF antenna. One of the things that stood out in the article for me was the yolo send to JLCPCB. It spoke volumes about your confidence in the CAD design, maybe one of these days I'll get there hahaha.

Great design and writeup btw, it looks as good if not better than most of the commercial designs out there. You might enjoy Bruce Van Deventer's vids on youtube: https://www.youtube.com/@djcheckonetwo/videos (direct drive mount with 26 bit renishaw ring encoder might whet your appetite a bit)

[waerhert]

Thanks for the compliment and links! Can you tell me more about the aircraft tracking? I've been toying with the idea of being able to select a nearby airplane on flightradar24 and instructing the mount to follow it as it comes into view. Not sure how I would even begin building that.

[jcims]

You could actually build a self-contained unit with a raspberry pi and a rtlsdr based receiver. They do a great job picking up ADSB directly from aircraft 100+ miles away.

You'd just need to write some glue code to take the ADSB streams from a given plane (could pick based on area or strongest signal or whatever) and convert that to alt/az from your reference frame to feed the motor controllers for tracking. Your mount would clearly be adequate for optical tracking so you'd want to add some smoothing and likely some kind of tracking corrections/trim but you'd be close right off the bat.

[jcims]

Forgot to mention, if you hook that ADSB receiver up to flightradar24 full time they (used to at least) give you a free membership.

https://www.flightradar24.com/share-your-data