[reaperducer]

Need a DTMF version.

There's a guy in Australia who makes tiny line-powered boxes that translate rotary pulses into Touch Tones.

They let me keep using my rotary phones until a few years ago when I moved into a building that had no POTS wiring. Sad.

[Daviey]

Connect it to a an FXS/ATA and make it a voip phone? I have, agmonst others, a candlestick phone from the 1920's still functional using this.

[oneoffcomment]

It would be great to hack together a 1920's style AI operator to put the calls through for you.

[bishopsmother]

Cisco SPA232D + Asterisk + Deepgram should work for this (per [0], that I'm currently testing/improving).

[0] https://blog.walledgarden.ai/2025-05-20/wabbit-s2-welcome-to...

[reaperducer]

Connect it to a an FXS/ATA and make it a voip phone?

I thought about it, but couldn't find a VOIP service that was the right combination of ease/cost/good hardware.

[Daviey]

What's your criteria for the 3?

For hardware, any of these should be sufficient (as they support pulse dialing):

  - Minitar MVA11A
  - Grandstream HT502 & GXW-4008
  - Primus Lingo iAN-02EX
  - Innomedia MTA6328-2Re
  - Motorola VT-1005
  - Audio Codes MP-114 FXO
  - Digium IAXy s101i
  - Linksys RTP300  (Before firmware version 3 I believe)

(Source: https://www.classicrotaryphones.com/forum/index.php?topic=20...)

For ease and cost, you can get connectivity for almost free (depending on the country) - should just need to add the SIP/IAX login details, so what is your criteria?

[reaperducer]

It's been at least four years since I looked, which U.S. services do you recommend?

I only use my phone for voice calls three or four times a year, so cheap is important. But my wife will use it, so reliability is important.

If I could get something for $10/month, that would be ideal.

The list you pulled from that forum is seven years old, and only one of the five boxes I tried to find is still available.

[jasonjayr]

https://voip.ms is running my "land line" to the house, really just camping on a number we've had for years and is used in a bunch of important accounts, and to give out as a number to companies or people I do not want ringing my cell phone.

I think I pay USD $20 every 4-5 months to top it off. (about 3-5 inbound calls a day, and maybe 1-2 outbound calls every week or so) ATA adapters are relatively cheap to come by, which should be able to configured directly to voip.ms. I run a full FreePBX in my homelab for my connection: my ATA connects to that instead, and is connected to a cheap analog cordless phone.