[Bedon292]

I definitely like it. I experience regular outages and have a whole home generator because of it. But that takes time and isn't cleat. So this is basically how I already have everything set up, with ~6 UPSs scattered around. And I have looked at the whole home systems to get away from that. But the mesh with smart features is definitely interesting.

Does it have any power cleaning functionality? I have occasional issues with voltage drop and it and confuses some of my stuff. The input V is out of range and it cannot get it back up to 120V so it ends up just turning off to avoid passing through to the equipment.

And how about any automatic load shedding? I have some which will start turning off outlets based on percent battery left, to power the most important stuff longer.

You also mention moving past the basic lead acid UPS. I can't seem to find it anywhere, are you not using lead acid batteries? Or what are you using? Will I be able to buy a replacement battery up the street at the battery store like I can my current UPSs? Or will I be locked in to buying replacements from you?

Also looks like you have Smart Outlet Strips mentioned, which are only 3 outlets. Any plans for something more substantial? Like 12s? Most places I have UPSs there are many things plugged in and a single 12 would be preferable over multiple.

[nikodunk]

It does have power cleaning functionality when it's off-grid, let me check in with hardware if it does that in pass-through mode. Voltage drops it should detect and cover though.

Automatic load shedding will be configured by appliance priority we were thinking, but open to feedback. The fridge should go out last, the wifi first.

We're using a 1.6kWh LiFePo! Replacement is something we're working hard on, I unfortunately can't speak to that until we're closer to shipping (Q3/Q4).

There are 4 outlets btw - 2 on the front, 2 on the back. Plus 4 USB-C outlets that output 100W DC. 100% we are planning something more substantial (240V is also requested a lot), but we're only launching with 1 SKU that fits a lot of use cases for now.

[Bedon292]

So in my case they are momentary voltage drops. It can accept 81-145V and will throw an error and turn off outside of that. It used to happen a lot, but there have been recent improvements, and it has only happened once in the last couple months.

And yeah, configuring priority by plug is basically how my current system works. These ones turn off at 50%, these ones at 25% and this one goes all the way until the end. As long as there is a plan to do something along those lines, that fits the use case.

An important feature for me would be 3rd party replacement batteries. Ideally I want to be able to go up to Batteries+ / Interstate Battery / whatever local battery place and pick up a replacement. All my current UPSs are Lead Acid and I can just go up the street and get a new one. If its using something like a standard deep cycle marine battery that I can pull out and swap for a new one, then I would be interested. If its totally proprietary and I have to rely on you still making them in 5-10 years when I need a new one, then it is far less interesting.

And yeah, there are the 4 outlets on the main device. I was referring to the accessories on the Tech Specs page. I know they aren't out yet. Just expressing interest in more plugs. Something with 3 doesn't really do much for me. I have something like 8-10 plugs here at my desk. And a similar amount in the living room. One with 3 plugs on it only nets you 2 additional plugs. It would be a huge mess.

[nikodunk]

Probably only passing power through when it's still on-grid, because it's more efficient is our current plan for now. Surge protection we will cover though, just voltage drops are not planned to be covered for above reasons.

As soon as the power's going through our inverter, it'll be the clean sine wave you are talking about.