[linsomniac]

>Longer distance and penetration is not always an advantage

Exactly. When I was running WiFi for PyCon, I kept the radios lower (on tables) and the power levels at the lower end (especially for 2.4GHz, which a lot of devices still were limited to at the time). Human bodies do a good job of limiting the cell size and interference between adjacent APs in that model. I could count on at least a couple people every conference to track me down and tell me I needed to increase the power on the APs. ;-)

[consp]

That works if you control all the radios. If there is some other device screaming into the void you are screwed either way. (been there)

[linsomniac]

One event I particularly remember, the venue had ONE AP (and they had assured us that they could provide WiFi coverage for our 500 users, that was set to high power, their AP I found during the event, it was on the floor under a bench outside the master ballroom. This was the venue that I eventually tracked down was handing out DHCP leases with IP addresses that had a gateway address in a different subnet than the client IP. That was, admittedly, 2005, but the confidence they had in being able to serve our attendees, despite us telling them it wasn't going to be as easy as they thought, was stunning.