[portasynthinca3]

Thanks!

The dot matrix is actually eight 5x8 characters, or 320 bits in total. I'm packing those 320 bits into the the 4 bits per byte that are available to us in this shell protocol. Plus, another 9 bytes for the packet header and footer. Looks like I wrote 92 in the article, I must have miscalculated that.

I'm not using the full 7 bits because figuring out a way to do so turned out to be way too hard for me, so I opted for a solution that is negligibly worse than the optimal one, in comparison to the original one.

If you're wondering about the exact algorithm, consider checking these files out, but please keep in mind that I haven't cleaned the code up yet: https://github.com/portasynthinca3/swl01u/blob/master/fun/bi..., https://github.com/portasynthinca3/swl01u/blob/master/fun/ba...

[phkahler]

Another option might be to modify the baud rate of the MIDI interface. MIDI is terribly slow at 1M/32 bps, and most UARTs can go at least 115200. That would also mean changing the baud rate on your PC software at that point in transmission, and would not allow a standard MIDI file to be used.

[lambda]

This was being done over USB midi, which is already faster than standard DIN midi AFAIK. Trying to change the baud rate of DIN midi on both ends of the communication seems like a lot of work.