[YZF]

Are you suggesting some protocol layer of Fibre Channel to be used over IP over Ethernet?

TCP (in practice) runs on top of (mostly) routed IP networks and network architectures. E.g. a spine/leaf network with BGP. Fibre Channel as I understand it is mostly used in more or less point to point connections? I do see some mention of "Switched Fabric" but is that very common?

[UltraSane]

Fibre Channel is a routed L3 protocol that can support loop-free multi-path typologies.

[YZF]

I'll admit I'm not familiar with the routing protocols used for Fibre Channel. Is there some equivalent of BGP? How well does it scale? What vendors sell FC switches and what's the cost compared to Ethernet/IP/TCP?

[UltraSane]

FC uses Fabric Shortest Path First, which is a lot like OSPF. It can scale to 2^64 ports. There is no FC equivalent of BGP. Broadcom, Cisco, HP, Lenovo, IBM sell FC switches, but some of them are probably rebadged Broadcom switches. The worst thing about FC is that the switches are licensed per port so you might not be able to use all the ports on the device. A brocade G720 with 24 32Gb usable ports is $28,000 on CDW. It has 64 physical ports. a 24 port license is $31,000 on CDW. So it is REALLY freaking expensive. But for servers a company can't make money without it is absolutely worth it. One place I worked had a old EMC FC SAN with 8 years of 100% uptime.