|
|
|
|
|
by nahumba
617 days ago
|
|
The advantage of am over fm is the simplicity of the electronic circuit.
In am its very easy to create a receiver to listen to broadcast. While an fm radio is too complicated for amature electronic. So i dont belive am will ever be dropped for emergency radio |
|
It is working through slope detection. Basically if you've got FM at frequency X carrying voice and you measure the energy at a frequency a little bit away from X, as the FM signal frequency varies due to the voice modulation the energy you measure near X will vary in a similar way, so your voice modulation of the frequency X becomes amplitude modulation of your energy measurement.
You can play with this on an SDR, such as a cheap RTL-SDR dongle. Find an FM station and tune to its center frequency with your SDR software set for FM demodulation, and verify that you are indeed on an FM station broadcasting voice and/or music. Then switch the SDR software to AM demodulation and start slowly tuning away from the FM center frequency. You should find a point where you can clearly hear the voice and/or music. It won't sound great compared to FM demodulation of the same station, or compared to an AM station, but it should be serviceable for receiving emergency information.
[1] https://www.reddit.com/r/HamRadio/comments/oz5rri/i_accident...