| This is a really interesting perspective but I wish they finished writing the equations out. My attempt at verification didn't match. Per [1], “[wells] with a regular production casing diameter of 200-250 mm have an average capacity of 5.5 MWe”. Quaise has deep bores that could potentially have higher temperatures, but let's stick with 5 MWe. At the article's 12 MWh/m³ for drilling, and 250mm bores of depth 10km, WolframAlpha tells me that is 6 GWh. Divide through, you get 1000 hours or about a month. This doesn't match their “significantly over 10 years” they gave before mentioning waveguide losses. The main difference I suppose is the thermal conductivity comment, where I didn't follow why Quaise wouldn't be able to use enhanced geothermal approaches. More specifically I think that if a Quaise well has ~1% the energy output of a normal geothermal well, it's pretty weird to frame the problem as about the energy cost of drilling, and not the whole factor-100 reduction in energy output. To be clear, this seemed like an interesting article and I'm not claiming my napkin math is definitive, I really am neither an expert nor someone who has spent a lot of time investigating this. I do think some more clarity on how the math looks would help their case. [1] https://www.thinkgeoenergy.com/report-success-of-high-temper... |
Enhanced geothermal involves fracking. Typical proposals involve creating crack paths between 2 nearby wells by fracking from both. It's been tested some but so far has not been economical.
Apart from the cost issues of enhanced geothermal so far, Quaise plans to drill deeper to higher temperatures to reduce power block costs. Sufficiently hot rock flows a little bit which makes fracking ineffective. Fracking also doesn't work as well with supercritical water. (If not drilling to rock hot enough to flow a little bit under high pressures, it would be much better to use conventional drilling techniques.)