[molticrystal]

I see some examples that show this can be used as a lite http daemon.

Is there enough room to have it control the ethernet port for another weaker or perhaps more powerful microcontroller?

Can you combine multiple picos with one being the ethernet stack and another that modifies certain packets?

Are there any other interesting things that can be done?

[bangaladore]

> Is there enough room to have it control the ethernet port for another weaker or perhaps more powerful microcontroller?

Well there is a whole unused core and plenty of built in SRAM. Seems like a good way to have an open-source version of Wiznet chips [1]. It could support full protocol offloading like Wiznet's or a lower-level raw packet sender/receiver like the ENC424J600.

[1] https://docs.wiznet.io/Product/iEthernet

[MartijnBraam]

I just quickly tried to fit the whole rp2040+ethernet phy in the WIZ850io formfactor (mainly because I already used that module in some projects before) and have not yet been able to make it fit without using the more expensive jlcpcb features like burried vias. It would be very cool to have though since the W5500 really needs an update.

[bangaladore]

I'm unable to respond to your deeper comment, but I don't see any issue at all with this. Your concern about the vias doesn't make sense as you just tent the vias anywhere you are concerned about shorts. I'm 100% certain you can fit both chips, all passives, etc, in this formfactor. If the flash size is a concern, RP2350 (the new version of the 2040) has integrated flash for some of their packages. Or just use a chip scale (or similar) flash instead of the one normally used on RP2040 designs.

[bangaladore]

A 4-layer in that form factor should be pretty doable with no fancy features like blind vias. The RP2040 and W5500 are the same size, and ethernet PHYs can be found in about 3x3mm or even smaller. There should be about 20x25mm of usable space in that module form factor (even conservatively, like 18x23).

I don't have the time to give it a shot myself, but I could try to help if needed.

[MartijnBraam]

The issue is more the space needed by all the passives, the crystal, the massive flash chip. I can just about make it fit but now I have the issue that the phy needs some vias to the center pad for gnd but that's always right at the point where my ethernet jack is on the other side.

[Lerc]

Make a package that has a rp2050 mounted on a microSD and you've got a NAS that nobody will ever find.

Back when I was doing a dumb-server/smart-client desktop environment. Something like this would have been pretty cool. It needed a tiny API to save files, but the bulk of the environment worked as a static server.

[throwaway81523]

This stuff all already exists, Raspberry Pi Zero 2 W. Board is slightly bigger than a Pico but has a full blown Linux system, 4 core arm64 cpu, 512MB ram, SD card slot, wifi, no ethernet though (add-ons are available). Or you could use a larger Pi.