[aidenn0]

As someone who is not a furniture maker and doesn't have access to a CNC machine, I was surprised by how good of a joint I can make with just a doweling jig. It does end up slightly more visible (assuming you aren't painting it), but it creates a very strong joint that is hard to mess up.

[foobarian]

As another layperson who always dreamed of making dovetail joints for strength, I was quite surprised at various explorations of joint strength on Youtube that tend to find that mitered box joints with dowels or splines beat most other joints by a wide margin. This is great because they are even easier to make, and can be made to look quite nice if you use a contrasting wood for the dowel/spline.

[kabes]

I know a miter joint, a box joint and dowel joint. But what is a mitered box joint with dowels?

[novaleaf]

could you post the link? I'd love to watch :D

[sgdesign]

https://www.youtube.com/channel/UCJNY2_y5nPoghlAO6FPxHfg

[rfrey]

How is it more visible?

Dowel joints are great, as far as I know Krenov never used anything else on his cabinet carcasses. I'm not sure why they developed a bad reputation.

[fian]

You are probably thinking of dowels used as loose tenons, where a blind hole is drilled into the mating pieces of wood and the dowel is not visible once the joint is together.

Sometimes people glue a butt or mitre joint, then once the glue has set, drill a through hole for a through dowel from an outside face of the joint.

The blind holes approach is tricky to get perfect alignment on where dowels are being added across a longer length. As a hobbyist I've tried a few cheaper dowelling jigs and had mixed success. This challenge lead to other loose tenon solutions like biscuits or dominos which allow for some side to side misalignment while retaining the ability to keep the visible faces aligned.

The through dowel approach avoids the misalignment problem, but comes with the visibility of the end grain of the dowel on one exposed face. Some people are ok with that.

Dowels are still one of the "strongest" options for end-grain to long-grain joints. Many professional woodworkers now favour dominos simply due to who quick it allows them to work and the additional allowance for some side-to-side alignment.

[aidenn0]

Easiest way is to drill through, then cut and sand the dowel flush; leaves a round circle where the grain doesn't match for each dowel.