| Thanks for your reply, Mark! The challenge for me is that the parts I'd like to use are not in the Flux library (or I can't find them). If I understand correctly, I would need to add them manually. To make sure I can use your simulator to check if all parts would work together, I would have to write some code, which is, sadly, way above my skill level. (I am fine with writing code, I just don't know enough about this domain.) I do like the Copilot feature, but, based on your video, it seems that I would need to add some properties that I don't much about. Just to be clear, Flux looks great, but it is perhaps for more advanced folks than me. Regarding my specific project, I would like to use: 1. Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT - 8MB Flash 2MB PSRAM (ESP32-PICO-V3-02): https://www.adafruit.com/product/5395 2. BTF-LIGHTING WS2812B IC RGB 5050SMD Pure Gold Individual Addressable LED Strip (one or two strips): https://www.amazon.com/gp/product/B01CDTECSG I also figured out that I should probably use: 3. Adafruit NeoDriver - I2C to NeoPixel Driver Board - Stemma QT: https://www.adafruit.com/product/5766 I haven't found these components in Flux. |