[Dagger2]

Can you tell us what the better transition story was? As far as I can tell, v6 is already approximately as interoperable with v4 as it's possible to be.

I don't get your claim that it's a separate island at all. It's not. This machine is v6-only and isn't on an island, it has full access to the entire Internet.

[commandersaki]

TUBA had a sane transition story [1] although I do not know of the mailing lists these were discussed (probably done in in-person IETF meetings).

For IPv6 transition mechanism you can look into the ngtrans mailing list regarding AutoIPv6 which is basically an extension of 6to4 but instead of connecting IPv6 networks over IPv4 it would extend to IPv4 hosts. There's also an archive link in my post history which you can lookup (on phone).

As for current v6 being interoperable with v4, that is patently false.

[1] https://datatracker.ietf.org/doc/html/draft-ietf-tuba-transi...

[orangeboats]

I think you are having a very romanticized view of 6to4 and its derivatives.

By the late 2000s it was clear as day that 6to4 wasn't working out (the design rationales of contemporary IPv4<->IPv6 transition technologies will tell you why [0]). By extension, AutoIPv6 which was building on 6to4 was also unlikely to work out. Even worse, AutoIPv6 relies at least partially on anycast 6to4 which was later deprecated due to operational problems [1].

The only surviving 6to4 derivative is 6rd and even that is mostly phased out.

>As for current v6 being interoperable with v4, that is patently false.

You need to define your scope. Are you talking about programming? Or ability for IPv6 clients to talk to IPv4 servers? Or...?

IPv6 is interoperable with IPv4 from a programmer's perspective, once you upgrade your sockets from accepting sockaddr_in to accepting sockaddr_in6, your program automatically receives both IPv4 and IPv6 packets with IPv4 addresses represented as ::ffff:x.y.z.w.

And from a client's perspective, IPv6 clients absolutely can connect to IPv4 servers through a border relay of some sort, typically NAT64. But you can do SIIT as well if you are feeling fancy. Note that this is not much different from 6to4 and its derivatives.

As for the perspective of a server, indeed this is unsolved but again AutoIPv6 doesn't solve the issue as well since the server still needs a public IPv4 address.

[0]: https://en.wikipedia.org/wiki/IPv6_rapid_deployment#Comparis...

[1]: https://datatracker.ietf.org/doc/html/rfc6343#section-3

[Dagger2]

Hm... according to that draft, TUBA's transition story is dual stack, which is the same as the main transition approach for v6. How come it's sane for TUBA but not sane when v6 does it?

> As for current v6 being interoperable with v4, that is patently false.

This machine is v6-only and can reach the entire Internet, including v4-only hosts. It clearly has more interoperability than you're claiming or this wouldn't be possible.

[commandersaki]

Interoperability would be the ability to use either IPv4 or IPv6 and talk to each other seamlessly. This is clearly not the case for IPv4 clients talking to IPv6 servers. This is clearly not the case for IPv6 servers accepting IPv4 connections.

As for TUBA, the transition plan incorporated tunneling, with a bit more thought put into this we could've had something similar to AutoIPv6. That document was just a starting point and outlined some important aspects of the criteria such as low administrative overhead for transitioning IPv4 networks to IPng, something which IPv6 falls completely flat on.

[Dagger2]

I've talked from v4 clients to v6 servers before, and I've accepted v4 connections to v6 servers. How can it be so clear that it's not possible when I've done it before?

> As for TUBA, the transition plan incorporated tunneling

The transition plan for v6 also incorporates tunneling (6in4 is the same thing as the EON tunneling described in the draft you linked), so again I ask why TUBA counts as having a sane transition plan when doing the same things in v6 doesn't.

There's not much administrative overhead involving in transitioning a network to v6. For most people it involves doing exactly no extra work beyond what they already do to deploy v4. Of course, you do need to reconfigure anything that's been configured such that it can only work with v4 (and this might be quite a lot of stuff), but that was always going to be necessary no matter what you're transitioning to.