| There are Civil Engineers here (I only studied it at Uni - I ended up in IT!) When you deploy a structure like a retaining wall you want to try and ensure that the materials you use will retain their properties as long as possible and if part of it fails, it should not case the whole structure to fail. Add additional design requirements as you like eg colour and texture but always think about function first or you will regret it later! In a garden setting, you will want to consider: gabions, drystone walling and "sleepers" (large lumps of wood - like railway sleepers). Some quick material thoughts: Wood is prone to rotting, so ensure it is treated and well drained. Drystone walling can be prone to collapse unless it is allowed to drain properly and plants/weeds should be removed. It should be slanted at around 5 degrees from vertical to resist collapse. Gabions made of galvanized steel wire are extremely strong and resistant to pretty much anything. Devon Popples are an ideal filling for gabions and make a phenomenal structure. I built a deck part way down in my garden. It is about 5m wide and sticks out about 1.8m. Behind it is a sleeper retaining wall which is about 1.8m high. I angled it back by about 2 degrees from vertical. I laid it on a concrete strip to spread the load and gravel base and back filled with quite a lot of scrap brick and rubbish for drainage. I used some 2m x 10mm stainless steel threaded rods embedded into the conc base to ensure horizontal stability (horizontal shear). I used 180mm, No. 10 passivated screws to keep the wall together whilst I built it and back filled. "Where can we read more on this engineering" It's everywhere but you will have to deal with local conditions. I am not convinced you are what you claim. |
Knowing where to look without colleagues or steeping in the field is difficult. When teaching people to code, I often run into the same issue: assuming people are good at googling, or know what Stack Overflow is.