[sharkdp]

So 'year' refers to the Gregorian year and is equal to 365.243 days [1]. We also have 'julian_year' which is equal to '365.25 days'.

We also have 'sidereal_day' equal to '23.9345 hours', and if you believe it is useful, we can also add 'sidereal_years'.

[1] https://numbat.dev/doc/list-units.html

[thriftwy]

Do you have a calendar_year and a calendar_leap_year?

[techdragon]

Ok so I did some reading and I like what I see, its important however to properly disambiguate between the two kinds of time units.

Chronological Time units and Calendrical Time units... These are fundamentally different concepts that overlap a lot in day to day life but when you need to ensure technical accuracy, can be very different.

- Planck time, Stoney time, Second: Unambiguously valid for both chronological and calendrical usage. Since we define everything in terms of the second anyway it's basically the centre of the Venn diagram.

- Sidereal day: It isn't a fixed value over longer periods of time, getting longer at a rate on the order of 1.7 milliseconds per century [1], so a conversion of a short period like 7 sidereal days into seconds is going to be off by something like 3.26×10^-7 seconds which might be ok, particularly if you also track the precision of values to avoid introducing false precision in the output, since you can then truncate the precision to above the error margin for a calculation like this one and treat it unambiguously as valid for both calendrical and chronological purposes.

- It's also worth noting since you mentioned it, the slight difference between Tropical year (seconds the earth takes to do a complete orbit around the sun), and Sidereal Year (seconds for the sun to fully traverse the astronomical ecliptic), the sidereal year is longer due to the precession of the equinoxes.

- Minute, Hour: These can vary in length up to a second if a leap second is accounted for, so while conventionally fine for chronological calculations as fixed multiples, don't have precise chronological values when used with calendar calculations. The exact number of minutes between now and 2030 is fixed, but the number of seconds in those minutes is not.

- Day: In addition to leap seconds, the length of a calendar day also have to deal with the ambiguity of daylight savings time and are where the significant differences in calendrical calculations vs chronological calculations really start to kick in.

- Week, Fortnight: all the problems of days but magnified by 7 and fourteen respectively. Also, theres the concept of standard business weeks and ISO week calendars, where some years wind up with more weeks than others due to the ISO week related calendar rules.

- Month: Obvious problem... "which month?" theres quite a few less seconds in February than in October.

- Julian year, Gregorian year: These are conventionally defined by how many days they have and the leap day rules and then approximated to an average seconds value so you can "pave over" the problem here and a lot of people might not be as surprised as if you average the length of a day or a month.

- Decade, Century, Millennium: are all affected by leap day related rules, and over a given length of time you see the introduction of an unknown but sort of predictable number of leap seconds. So while you can average it down yet again, the problems of anything bigger than a day have reached the point where over a millennium you're dealing approximately 0.017 seconds of change in the rotation of the earth,

Doing this right is basically incompatible with doing this the easy way, I'd at least re-label the averaged time units to make the use of average approximations more obvious, and ideally I'd split the time types into calendrical and chronological, and use more sophisticated (and I'll be the first to admit, annoying to implement) calendar math for the chronological calculations.

[1] - Dennis D. McCarthy; Kenneth P. Seidelmann (18 September 2009). Time: From Earth Rotation to Atomic Physics. John Wiley & Sons. p. 232. ISBN 978-3-527-62795-0.

[joshuanapoli]

The entire type system needs to be parameterized by the inertial frame of reference, too.

[techdragon]

Some people may think you’re tossing out a sarcastic joke here… but unambiguously fuck yes … because doing this kind of preemptive typing, the forward thinking to “frame of reference” is basically the next step after overhauling everything to disambiguate between calendrical and chronological timekeeping and units…

Because fundamentally you can’t correct for the reference frame if you can’t work out if your dealing with chronological or calendrical units. Calendrical units are in a weird liminal space outside of the earth reference frame. We measure the history of most deep space missions by earth reference frame mission elapsed time and do so by keeping a clock on earth and silently keeping records of the vehicle clock.. but on Mars we have a per mission Sol count that brings Mars time into the mix, and I know for a fact a lot of people neglect the barycentric gravity gradient difference between Earth and Mars because for literally 99.9% of things it doesn’t matter… but if you measure a transit of an Astronomical body from instruments on Mars and don’t deal with the relative reference frames your fractions of an arc second are basically pointless false precision.

[joshuanapoli]

It would be fun to play an interstellar mashup of Sid Meyer’s Civilization and Kerbal Space Program.

[thriftwy]

Isn't that Sid Meyer's Alpha Centauri?

[joshuanapoli]

Alpha Centauri is simply a weird earth. I think that a game around long-lived creatures that colonize a galaxy and have to work with relativistic effects could be different and fun. At some level it builds on all these different ways of looking at time. Breathe some life via simulation into this tongue-in-cheek interstellar economics: https://www.princeton.edu/~pkrugman/interstellar.pdf