[8note]

> Improved bumper switch mechanism drop reliability

> Moved bumper switch to joystick board for easier repair

These are such a big deal, and such a design flaw in the first deck.

The most breakable part(eg. From any drop) requires valve to do the repairs because the same board houses the most complicated parts

[theodric]

I'd argue that putting the USB-C charge port directly on the motherboard instead of a replaceable carrier was an equally poor choice. One booboo or too many accessory plug-unplug cycles requires a motherboard replacement, RMA, or a hotplate and hot air at a minimum. There are contacts that are under the USB-C port module, so it's not even possible to change it with an iron. Better a separate daughterboard connected by FPC. Mine has a magnetic wearout extender on it now.

[sleepybrett]

Yeah my old intel macbook (touchbar) is pretty much unusable because the usb-c ports no longer 'click' so keeping a power cord plugged in is incredibly frustrating. I asked a guy at the local non-apple mac store and he said in my model they are soldered directly onto the motherboard and are a bitch to replace. Apple just wants to replace the whole motherboard. I think now they put them on daughterboards but i'm not sure. Thankfully the m2 I replaced it with has magsafe (or you can use usb-c to charge if you find yourself without a magsafe cord) so far less cycles on the usb ports.