[mauvehaus]

Do woodworking. The whirling blades are pretty apparent. Wear a dust mask while sanding, and take comfort that Jesus was a carpenter and didn't die of respiratory illness/failure.

Don't do your own rigging or wiring, and you'll probably be fine. I do much of my own on both and I'm still ok.

Watch the tommy bar on your vise, and mind your marking knife. The apparently harmless things will get you because you pay them less mind.

Source: am a furniture maker. I still have 10 fingers. Haven't died of respiratory illness yet. Nor have I burned my shit down or crushed myself moving machinery. I have definitely made an unplanned trip for super glue after slicing myself with a marking knife.

[ethbr1]

To be fair, Jesus didn't live long enough for late life lung-related illnesses to manifest.

[tomcam]

While I am not Christian, I am a huge respecter of Christianity on average.

But that made me giggle like a schoolgirl.

[YZF]

+ ear protection + eye protection. Table saws and routers need some healthy respect, some training won't hurt. You can do a lot with hand tools and that can be fun too (and pretty safe).

[qup]

I'm most afraid of the router.

I've heard more people are hurt each year by angle grinders than any other tool.

I've only been hurt by two power tools: one was a drill, it slipped off the screw and made the pad of my finger into hamburger.

The other was my table saw, twice. Both kickback events that threw wood at my abdomen. I'm a pretty careful user, definitely not a cowboy. Mistakes are easy to make. I'm very careful with my fingers, at least!

[Doxin]

> I've heard more people are hurt each year by angle grinders than any other tool.

Angle grinders are used a lot on jobsites by jabronis who like to remove the guard and suchlike.

In the workshop I'd be most careful around the bandsaw to be honest. It's slow moving and doesn't make much noise, but will cut through three fingers before you notice the pain. At least table saws and friends have a tendency to bounce off of bone so you don't tend to end up with full on amputations.

Kickback is somewhat nonintuitive though, so watch for that!

[qup]

> Angle grinders are used a lot on jobsites by jabronis who like to remove the guard and suchlike.

And homeowners putting sawblades on them. Eek!

https://www.thesun.co.uk/news/3022661/husband-killed-when-he...

[michaelt]

Tool-vs-tool danger comparisons are all apples-to-oranges comparisons.

How does a handheld danger that can move around or be dropped compare to a heavy, stationary danger that's in a predictable location?

How does one big danger rank against several smaller dangers? What about a clearly obvious danger vs a less obvious one?

Which safety procedures can you assume to be followed? Welders wear a mask and gloves at all times, but not everyone using a table saw uses a pushing stick.

How much experience and skill should you expect the users have? Users who are expecting a tool to buck or bind will be ready for it - does it matter that inexperienced users might not be ready?

If two tools are equally dangerous in a spacious workshop, but one can also be used up ladders and upside-down in crawlspaces, is it more dangerous because of that?

Do you just rank classic tools like hammers and drills, or do you have a broader definition? Is a ladder a tool, for purposes of the ranking? Is a car?

[YZF]

I own a bandsaw and it doesn't scare me. It just does what it's supposed to do. If you put your finger in it then it'll cut it off... So I just don't do that ;) A router can literally jump out of your hands, a table saw can pull you in, or kick out- you really need to know what you're doing (use a push stick, don't stand right behind the piece etc.).

[Doxin]

> If you put your finger in it then it'll cut it off... So I just don't do that

Ah yes, simply don't make any mistakes ever ;-P

Fair enough though. I suppose the thing that makes table saws / routers / etc seem safer -- to me at least -- is because they look and sound scary. An untrained novice is much more likely to be careless around a band saw than around a table saw.

[YZF]

You need to be "present" when using the tool, respect it, and maintain very healthy safety margins. Before I flip the bandsaw switch on I think about what I'm doing. I don't get close to the blade. For me this is what makes this safe.

The router, even when you do all the above, it can jump, it can throw material off, it keeps spinning for a surprisingly long time after you power it off. All these characteristics make it less predictable. You need to understand it at a somewhat deeper level, how much can you cut, what direction to go, what direction is the grain going. You need to hold/brace it understanding that it can be unexpected and has a lot more power than you think. That's what makes it a more dangerous tool. Ofcourse properly used - it's fine.

[qup]

I've never been around a quiet band saw. Mines easily as loud as my table saw. To be fair, my table saw runs smooth as butter, but the band saw has some slight imbalance I've been chasing for a couple of years.

None of them sound like the router though. It's a banshee from a nightmare. I don't even like using it when it's mounted.

[1letterunixname]

Very cool! Superglue for cuts. The ol' waiter trick.

Yep. It's indeed possible.

Some best practices I recall growing up with:

Eyes, ears, feet, and lung protection.

Loose hair, jewelry, clothing anti-snag policy.

Keep body out of the kill line of potential RUDs.

Keep dust contained.

Keep fresh air moving toward you.

Push sticks, finger boards, and keep your tender bits out of the business end.

For circular saws, there is SawStop. https://www.sawstop.com/why-sawstop/the-technology/

Don't rush or work tired.

---

As blue collar guys, there are some risks my dad and grandfather didn't account for such as dipping their hands in and breathing carcinogenic solvents. In general, it's wiser to overdo PPE than play hard tough guy and shortening one's life for nothing. Safety regs are written in blood, but only after the fact.

[imgabe]

> take comfort that Jesus was a carpenter and didn't die of respiratory illness/failure

No, but it was an unfortunate incident involving some nails.

[hef19898]

Just shows that have to be careful when working with others.

And I promise, I'll try to scale to my sarcasm.