[manarth]

> If they had a method to keep 382 bar of water dynamically out of the ballast tanks

By filling the ballast tanks with 382 bar of air.

The human-interior of the sub is maintained at 1 bar to avoid compression demands (hyperoxic seizure triggers at approx 7.6 bar when breathing atmospheric gases; HPNS (High Pressure Nervous Syndrome) is common after 16 bar on a helium-oxygen mix), and decompression requirements.

Equalizing the inside-outside pressures would help a lot with the composite materials, and somewhat less so with the fleshy meat bags inside.

[fastball]

I think you may have led me astray with that first comment, and that my intuition was probably correct. How exactly does one purge the ballast tank with the air tank? Would you not actually need an air tank that has (at least) double the pressure of the outside water? Then to clear the ballast tank you would open the air tank, the higher pressure air would then force out the lower pressure water (this is clearly why it can't be the same pressure as implied in your first comment), and then when you're done you have two tanks (your air and ballast tanks) both at 380 bar, assuming they are both the same volume.

In that case you'd actually need a PV rated for 740 bar, which seems outside our current materials science abilities. In fact (and I'm still mostly just spitballing here, not actually doing any math), I assume you actually need a purge tank with a pressure much greater than 2x, otherwise you're just cancelling out your ballast with your air tank, right?

That would track with using this system in submersibles that are operating at ~300m and not for things like this which are trying to operate at 4000m. At 300m you could have a 400 bar COPV for emergency purging that is only 7.5% the size of the ballast tanks, which sounds practical.