[balakk]

Can you please explain your math? AFAIK Azure txns are not paid by the hour - they are a flat cost of $.01 per 10000 storage txns. If you do batched GETs and PUTs you make only 550 txns (55000/100 entites/batch).

http://www.windowsazure.com/en-us/home/tour/storage/

I agree that Dynamo's provisioned throughput capacity is a very useful feature though. Azure does not provide any such performance guarantee; the throughput limit is also a guideline as far as i know, not an absolute barrier.

[rojabuck]

I should have explained that my costs were calculated on a "per day" assumption. Thus the costs are for:

5000 x 60 x 60 x 24 = 432000000 Writes

50000 x 60 x 60 x 24 = 4320000000 Reads

(432000000/10000) x 0.01 = $432

(4320000000/10000) x 0.01 = $4320

Azure Total Cost For One Days Use: $4752

((5000/10) x 0.01) x 24 = $120

((50000/50) x 0.01) x 24 = $240

AWS Total Cost For One Days Use: $360

You are right that I don't take into account the bulk feature of azure reads & writes but this is down to bulk requests only being possible on a single partition at a time which in my personal experience (not exhaustive) is non-trivial to take advantage of.

[balakk]

Your math is right, except you missed a factor for Dynamo - Unit size.

http://aws.amazon.com/dynamodb/#pricing

If your txns are all within 1KB, your math holds good; otherwise, you pay more. Interesting model, but I suspect it'll average out to similar costs.

[BradCalder]

The cost difference between Windows Azure Tables and DynamoDB really depends upon the size of the entities being operated over and the amount of data stored. If an application can benefit from batch transactions or query operations, the savings can be a lot per entity using Windows Azure Tables.

For the cost of storage. The base price for Windows Azure Tables is $0.14/GB/month, and the base price for DynamoDB is $1.00/GB/month.

For transactions, there is the following tradeoff

• DynamoDB is cheaper if the application performs operations mainly on small items (couple KBs in size), and the application can’t benefit from batch or query operations that Windows Azure Tables provide

• Windows Azure Tables is cheaper for larger sized entities, when batch transactions are used, or when range queries are used

The following shows the cost of writing or reading 1 million entities per hour (277.78 per second) for different sized entities (1KB vs 64KB). It also includes the cost difference between strong and eventually consistent reads for DynamoDB. Note, Windows Azure Tables allows batch operations and queries for many entities at once, at a discounted price. The cost shown below is the cost per hour for writing or reading 1,000,000 entities per hour (277.78 per second).

• 1KB single entity writes -- Azure=$1 and DynamoDB=$0.28

• 64KB single entity writes -- Azure=$1 and DynamoDB=$17.78

• 1KB batch writes (with batch size of 100 entities) -- Azure=$0.01 and DynamoDB=$0.28

• 64KB batch writes (with batch size of 100 entities) -- Azure=$0.01 and DynamoDB=$17.78

• 1KB strong consistency reads -- Azure=$1 and DynamoDB=$0.05

• 64KB strong consistency reads -- Azure=$1 and DynamoDB=$3.54

• 1KB strong consistency reads via query/scan (assuming 50 entities returned on each request) – Azure=$0.02, DynamoDB=$0.05

• 64KB strong consistency reads via query/scan (assuming 50 entities returned on each request) – Azure=$0.02, DynamoDB=$3.54

• 1KB eventual consistency reads – DynamoDB=$0.028

• 64KB eventual consistency reads – DynamoDB=$1.77