| If you have a need and you already own it - knock yourself out. But comparing spending 40 bucks on craigslist or ebay for an old pentium/core 2 duo, vs getting an rpi... You're probably better off with the Pi (assuming you can source it, which is not a given atm). I don't even buy most of mine used, I just get hand-me-downs from friends/family because they want to get rid of the machine and ask me to wipe the drive in exchange for the hardware, but even at an upfront cost of free, a machine using 100 watts over a year is 80 bucks in my region, and my power is right around the US average. Plus power in my region is tiered, so the first 650kwh per month are cheap, the next 350 are avg, and the rest are expensive. So adding machines at this point is actually closer to ~$130 a year at 100 watts idle (paying for t3 rates). Personally, it's just not worth it to me to take a freebie that runs me $100+ in costs a year. Not even accounting for the knock-on costs, like the extra AC needed because 100 watts is a small heater. ---- So sure - lots of older machines do just fine (the end of the core 2 duo line is quite reasonable, and most laptops are actually fine) but it's really probably worth measuring the power draw. The five year cost of operating that rpi is ~$30, the five year cost of operating a 100 watt machine are ~$450. And I can run a LOT more low power machines and stay in my t1/t2 pricing for power. |
Do you have any pointers what sort of equipment to use to measure the power draw? Are you simply measuring it from a UPS?