[fnordpiglet]

Just because plasticizer has the word in its name doesn’t make it plastic. Nylon, PLA, PET, ABS, these are plastics. As far as I can tell they are not endocrine disruptors, and they are polymers - aka plastics. They require no other “ingredients” and can be used in an unadulterated form for many applications.

Phthalates are monomers (aka not plastics) that are added to plastics to change physical properties of a plastic, such as flexibility, durability, make them more transparent, etc. They’re in fact derived from alcohols to my memory, and have no relationship to plastic. But they are also called plasticizers because they make plastics behave more “plastic” (in the adjective sense not the chemical sense). They are also suspected of being endocrine disruptors. But they’re not “plastic ingredients” - their use is optional and there exist alternatives.

It is in fact an important distinction. There are other plasticizers that are not biologically active that can be used in place. Or, plasticizers don’t need to be used at all. Both of these options make the plastics benign.

It’s an important distinction because plastic isn’t the problem at all, it’s the regulatory framework around plastic additives, none of which are strictly necessary and there are almost always safer alternatives. Plus it’s important to distinguish because it’s simply false to say plastics are a an endocrine disruptor when they aren’t, even if it’s convenient to get your point across.

[coryrc]

ABS is only partially a plastic.

You can't avoid a plasticizer and still use i.e. PVC for the vast majority of its consumer use cases, which is what you are alluding to (I think) but you also can't just use the same molds and design with a different plastic. Of something's designed for UV resistance, you can't use the same design with an environmentally-friendly plastic. Like, it would have to be designed to be painted or metallized or something. At this point it's a different product: the products as currently made must be outlawed. No more aluminum cans with soda. No more lightweight waterproof jackets.

[fnordpiglet]

Goretex is made from PTFE which is pretty safe at normal environmental temperatures.

But, yes, the additives we use were picked for practical reasons and only later learned to be unsafe.

Phthalates are generally the most concerning plasticizer but they’re being phased out in favor of safer alternatives, and even safer alternatives are being intensely researched. According to this website [0] non phthalates account for 20% of all plasticizer today an expected to grow 4% in 2022.

What I find strange is the assertion that my cheap Chinese steel water bottle is somehow safer than a food grade PET water bottle from a reputable manufacturer.

[0] https://www.ceresana.com/en/market-studies/chemicals/plastic...

[klipt]

Right but in the absence of regulation, I would treat with suspicion e.g. fast food in any plastic container (or waterproofed "paper" container which usually means a plastic layer too).

I consider glass, stainless steel, and cast iron safe, and try to avoid almost anything non stick or plastic for cooking/food storage.

[fnordpiglet]

PTFE (nonstick coating marketed under Teflon) is safe unless you inhale a lot of its fumes by heating it to over 500F. And by a lot I mean cases of fume fever show up with people welding lots of ptfe. You are probably thinking of Perfluorooctanoic acid, which is carcinogenic but most exposure happens from fabric coatings. It was banned in the US in 2013 and none of it is manufactured or used in the US currently.

Which is an example of regulation of additives to plastics. The plastic itself (PTFE) isn’t the problem, it’s the additives.

I’d point out interestingly PTFE is what Goretex is made out of. You heat PTFE then jerk it hard and it foams into a fabric.

[klipt]

> The plastic itself (PTFE) isn’t the problem, it’s the additives

Yes and what additives are being added to the PTFE in your non stick pan now? Do you know? Are they proven safe or merely not banned yet?

[fnordpiglet]

In the absence of regulation I see no reason to believe that metal is stainless steel, that glass is unadulterated, or that iron doesn’t have toxic metals mixed in.

I would focus energy on advocating for regulation unless you smelt your own metals.

Edit: I’d be much more afraid of heavy metals from low quality steel, glass, and iron than modern plastic additives. Food grade plastics are heavily regulated, but metals and glass not really outside of a medical setting.

[klipt]

Toxic metals have been understood for a while so I would hope they are better regulated.

Plasticizers are clearly not well regulated yet, "BPA free" stuff just uses BPS which is just as bad.

[fnordpiglet]

Hope isn’t a strategy.