|
|
|
|
|
|
by the_third_wave
1390 days ago
|
|
|
A car manufacturer which claimed you needed to replace the whole front end of the car to replace the battery would be ridiculed by everyone and soon be out of business. The fact that those batteries are glued down is not a valid reason to replace the whole top as is shown by the multitude of mobile devices with glued-down batteries which can be replaced without problems. They either have some strip you can pull to loosen the battery or a set of instructions on where to push a thin piece of plastic underneath the battery to lift it. Apple can do this as well but they don't want to |
|
|
And yes, Apple can do it and has even said they’re going to do it. So at this point, it’s just a matter of guessing for why they don’t do it now. And that could be any number of reasons, including easier manufacturing or in a surprise twist maybe easier repair. Look at the ifixit instructions and look at the spacing available to access the pull tabs for the adhesive around the various frame parts. It’s entirely reasonable to think that Apple did some math on battery repair frequency; on that fact that even when an M* systems battery is at the 80% mark where it’s eligible for repair that it will still be near or over 100% of the old intel laptop runtimes when new; evaluated the chances of those adhesive tabs breaking or having the battery or top case damaged while removing one or the other and decided that bundling the two together and eating the cost on battery repairs was the easier option for their repair people. Because ultimately Apple’s priorities likely are ease of manufacture first, ease of store based repair second and ease of user based repair third. Because even with really easy user based repair, I would venture to say close to 90% of people will still have Apple do it for $200. And I say that based both on the fact that Apple used to offer various DIY repair options for older models* and people have their mechanic or AutoZone replace their car batteries for them even though that’s literally just 2 bolts.
* I worked for an Apple authorized repair place in the G5 iMac days, in which for example the power supply was “user replaceable” and for which Apple offered customers DIY repair options on them. I can count on one hand, with fingers to spare, the number of customers who took us up on the option to order the part and do it themselves, even if having us do it meant longer turn around times. On the whole people don’t DIY repairs for things, and so engineering and manufacturing for that use case is probably a worse decision than engineering and designing for your own people and while those people might benefit from DIY friendly features, if that makes manufacture harder or more expensive, then that’s still likely a net negative trade off.