[silicon2401]

In my experience, even cheap IKEA stuff is pretty solid and well worth the cost as long as you treat it with care. Some stuff is garbage even if you're careful but I've never personally seen something from IKEA that isn't great if handled gently.

[brewdad]

In my experience, you get one move from IKEA furniture. By the time you've relocated it twice, whether across the room or across the country, it will become unstable and likely to fail.

If you are exceptionally careful and always have help moving anything of size, you may do better.

[iso1631]

My oldest Ikea unit is from 2007, it's moved 5 times since then, as solid now as the day I bought it, although that one is small enough to not have to dismantle.

I've got an ikea bed dismantled, moved, rebuilt 3 times no problem, and a bookcase with the same dismantle/rebuild process 4 times. My office desk is also on 4 moves over 10 years.

[kennend3]

My dad was a cabinit maker so i have experienced "proper" cabinets as well as Ikea stuff.

You called it. Ikea furniture never seems to support disassembly / reassembly.

I've thrown out several sets of Ikea dressers and such which lasted ~5 years while the stuff my dad built is still in perfect working condition 22 years later.

As far as the Ikea rack idea is concerned, holding any sort of weight has always been the major failure with Ikea furniture. They sell bookshelves which cant hold books... Dressers with 1/4 "cardboard" bottoms which cant support the weight of clothing.

you get what you pay for.

[detaro]

you can't really generalize that IMHO, they make both things that are easily damaged and stuff that can easily survive many moves.

[bombcar]

The IVAR system is, in my book, absolute complete junk. I couldn't get it to even attempt to work correctly, it wobbled when it wasn't collapsing, and to make insult even worse, it was more expensive than actual industrial wire shelving.

[layer8]

Did you forget to add cross-braces [0]? Ivar has always been rock-solid for me.

[0] https://www.ikea.com/us/en/p/observatoer-cross-brace-galvani...

[michaelhoffman]

Yeah despite my complaints about LACK above I have had only good experiences with the IVAR stuff, made out of real wood.

[bombcar]

Even with cross bracing it had too much wobble, which would pull the short pins out of the cross board, and if you bumped a shelf it would hop out and then fall.

[layer8]

That sounds like you didn’t properly clip the shelves on (it takes a bit of force). In any case, that’s not how Ivars usually behave.

[jpalomaki]

On trick is to add some glue when you are assembling the furniture.

[serf]

the lack I used for my prusa was , over time, covered in printed gusset features and additional L-brackets to get rid of sway and movement within the table itself.

it looked god-awful but it was sturdy for years and years of production-quantity printing. It was only disassembled when the print lab got rebuilt.

so, in other words, I support your idea of modifying the construction of the lack wholeheartedly. The joint lines are one of the only 'strong-ish' elements on the entire table, and I think they'd take glue nicely.