Hacker News new | ask | show | jobs
by bryanlarsen 5344 days ago
In many cases the $15 pot from WalMart is better than the $50 pot. It's thinner than the $50 pot, so it reacts to adjustments in temperature a lot faster. The coating is simple thin Teflon, so it wears out a lot faster than the $50 pot, but it actually has better non-stick properties than the $50 pot.

I've got expensive pots, but the skillets that I use the most are a $5 teflon/aluminum skillet I got from Loblaws that I replace every 6 months, and a $15 cast iron skillet I got from a flea market that I properly seasoned and I expect to last 100 years.
1 comments
culturestate 5344 days ago
(A bit off-topic, but...) I've supported myself on the side over the years as a cook, and I can tell you there are some misconceptions there. The difference in heating time is marginal, but thicker bottoms disperse heat _far_ more evenly, preventing hotspots that can ruin whatever you're cooking. Thin pans also have a tendency to warp, but you've solved this by replacing it every six months.

As far as nonstick properties go, a hard anodized pan will be every bit as nonstick as a cheap Teflon pan, but with the added benefit of not leaching chemicals into your food when it gets scratched. Aluminum pans are also great, provided that you know what you're doing - be sure to get them up to proper heat before adding your oil and/or ingredients, and clean them properly.

The cast iron is a great choice.

link
bryanlarsen 5343 days ago
That's not my experience. Aluminum is a great heat conductor and I've got a fairly nice stove, so I don't experience much in the way of hot spots. The outer ring of my pan is much cooler than the inside, but that's a good thing, IMO.

On the other hand, cast iron is not a good heat conductor, so I experience much greater heat variation with it unless I let it warm up for quite a while first. The aluminum I can use the instant I put it on the stove. I love it for that.

link
ars 5343 days ago
Teflon is pretty much the ultimate in inert. There is no way you are leaching any chemicals into your food. You could scrape the coating off and eat it and it would do nothing.
link