[ndsipa_pomu]

I bought a PinePhone along with the keyboard case to muck around on as well.

Initially, I got no response from the keyboard so I started reading up about it. The first think I found is that when you've got the phone attached to the keyboard, you mustn't use the phone socket for charging as it can fry the electronics (something about the charger chip in the keyboard, I believe) - only use the keyboard socket for charging when connected.

Then, after worrying about whether I'd fried a brand new device, I discovered that after a software update, the keyboard suddenly started working. However, the top row of keys weren't working well and required a stern press for them to activate, so I hit the forums again looking for a solution. Some people were making shims for the top row of keys, but then I found a post going into detail as to why the keys had trouble activating. Apparently, the rubber doesn't have enough room to squish down, so an easy solution (if you have a dremel) is to remove the top row keycaps and remove a mm of material from the top edge of each keys (the side nearest the hinge). Took me about ten minutes and now they work perfectly.

Still haven't found a good use case for it though as the screen is short and wide so not great for terminal hacking.