[drewzero1]

I still wouldn't go for HF tools (or any store brand... Tool Shop, Master Mechanic, take your pick) for anything I want to keep forever. You just can't get parts for most of that stuff. I only get HF or MM if I'm buying the tool for one job and need to fit in the budget, otherwise pretty much everything else I've got is pre-owned DeWalt et al. (The warranty-period breakdown is no joke, but a lot of times if they survive much past that they can be good for a while.)

I'm also still not totally sold on cordless tools. I've found corded tools generally much easier to repair. Extension cords are cheaper than batteries, and for my typical applications they're essentially interchangable.

[eropple]

I get where you're coming from, but their modern tools are pretty much in line with everyone else's--bear in mind that there isn't much of a cost savings from them, either. The Hercules portable table saw with a rack-and-pinion fence is a good example. A friend has one, I've calibrated it for him and gotten up into its guts. And it's built pretty well! But, by virtue of being built pretty well, it costs in line with what a Metabo HPT or DeWalt model does on sale, while having a slightly smaller table. Similarly you'll see pretty equivalent motors, bearings, etc. in those as in mid-range "name brand" cordless tools. I'm sure they shave here and there, but it isn't anywhere near what it used to be, and for light use they'll be fine for quite a long time. (Plus? Good return policies.)

There are few tools I wouldn't rather have cordless, though. Corded drills don't step to an impact driver for screw-driving (the only corded drill I have is a low-speed drill/mixer). Cords on an angle grinder or a jigsaw or the like get in the way more than they help. About the only corded hand tools I have are routers, and I wish my track saw was corded mostly so as to be able to pair the dust extractor with it (but I use the track saw outside a lot too, so it's a wash). All the corded tools in my shop have been retrofitted with either a Festool pigtail or a NEMA L5 locking connector to not have to deal with cords on the tool, and that helps, but it's still not great.

[mschuster91]

Cordless is a dream on construction sites without electricity though. No more danger of tripping over a cord and suddenly you have at least two injured people... a colleague back when I was working in construction had a nasty incident involving an angle grinder and some poor sod lugging a heavy bag of cement who tripped over the cord where the angle grinder was attached to.