|
|
|
|
|
by roel_v
5351 days ago
|
|
Only a very small part of the firmware, or more specifically, not really the firmware but just some chips that control the ignition timing and gas mixture. None of which puts other drivers at risk; at worst they blow up the engine of their own car (I don't know if that's possible with chip tuning, just saying). Many 'types' of car tuning that cause danger are already prohibited on most places. But if somebody could rewrite the firmware so that the car stereo controls all of a sudden are the only way to actuate the brakes, that could create very dangerous situations. Which I why I hope that there will remain strong regulations on what firmware people can load onto their cars, at least in as far as they use that car on public roads. |
|
Aside from some minor pulsing of the ABS module, it's a purely mechanical/hydraulic system. You push the pedal in, the master cylinder creates pressure in the line, and the brake caliper pistons get pushed out onto your brake rotors.
On the other hand, as seen in the Pruis nonsense last year, an increasing number of cars do use a electronic throttle which can lead to some interesting failure conditions.
The 'firmware' your discussing in your hypothetical situation is hacking the CANbus system - not the ECU firmware. One could, in todays systems, remap any CANbus device (even as odd as a headlight switch) to manipulate another CANbus device (such as the electronic throttle). Doing such nepharious things are possible today, but would take days worth of hacking and proprietary diagnostic hardware.
ECU controls, on the other hand, have been reverse engineered in nearly all cars being actively tracked/raced today. Bosch (BMW/Porsche), GM PCMs, Honda/Acura, Mistubishi, etc can be modified to control timing/fuel...add additional I/O and features (such as traction control, launch control, antilag, etc ...even when not equipped by the OEM).
Of my vehicles still running an OEM ECU, all have been running 'hacked' firmware without incident for nearly a decade. Even my ABS controller has been upgraded for better threshold braking performance.
If you're intersted in such things, please check out EFIuniversity [0], Ostrich, and persuse Motec's manuals for an idea of what's possible.
[0] www.efi101.com
[1] http://www.moates.net/documentation.php?documentation_id=24
[2] www.motec.com%2Ffiledownload.php%2FM4_M48_M8_Manual_A5.pdf