| Look at old thatched roof buildings from the 1600s in the UK. That's the kind of wall thickness you're looking at here. Modern "stick framing" construction is much thinner. Interior walls are four to five inches thick, depending on the actual dimensions of your 2x4 "sticks" and the drywall on either side of that. Exterior walls tend to be a bit thicker, depending on what kind of exterior surface you've chosen to put on the face. If you want to build to PassivHaus standards with modern construction, then Matt shows examples of that in his video series, and yes the walls are thicker than we would normally see. But still not as thick as you'd get with hempcrete. I'm not saying hempcrete is bad, I'm just saying that there is a factor there you have to take into consideration when you're looking at doing hempcrete construction for your walls. The problem with running cables and pipes through hempcrete is that it is a solid material throughout. In modern "stick frame" construction, there is typically no interior insulation and nothing between those two sheets of drywall, other than the 2x4 sticks that are 16 inches on center. So, with all that empty space in the walls, it's much easier to run cables and pipes. Again, not a deal breaker. But it is something you have to account for. And your current architects and construction crew will have to think and work harder now, in order to make life more livable for future architects and construction crews -- and future owners. |