[function_seven]

Could one build an SDR version of a radar detector that doesn't have a detectable oscillator? (Or, if it does, it's oscillating at a much higher frequency?)

I'm no RF guy, so I'm clueless on this stuff. But my understanding is that SDRs aren't radio receivers in the traditional sense. That's the whole "SD" part of it, the device scoops up everything and FFTs it or something.

[RF_Savage]

Radenso Theia does that.

But they are suffering from the chip shortage. I was interested in using it as an X-band and K-band capable SDR receiver, which is a supported use case according to their media. But we'll see when it ships.

[krapht]

It would be way cheaper to design the radar detector to have better RF isolation than to go towards an SDR solution.

A modern radar gun operates in the Ka-band, Google says between 33.4 and 36 GHz. Assuming 12 bit samples, your proposed solution needs to process a minimum 3.9 gigabits per second, or ~500 megabytes per second. To do this work in software would require a workstation.

Not to mention I'm not even sure if you can operate most ADCs above the 1st Nyquist zone like would be needed here.

[d110af5ccf]

> To do this work in software would require a workstation.

These days hardware capable of that throughput can be had for less than $500 and draws less than 50W. 3.9 gigabits really isn't all that much by modern standards.