[Retric]

Surface area is relevant for solar because the sun is so far away. A local heat source allows you to surround it with 3D shapes not just a flat plain.

As to temperature this thing is for very high temperatures: can generate electricity from a heat source of between 1,900 to 2,400 degrees Celsius. At 40% efficient you need a wide temperature difference which would suggest a high energy density.

[walnutclosefarm]

This design is photovoltaics, just like solar, but optimized for infrared photons. There is no avoiding the reality that energy storage density will scale as the cube of the facility size, but power density only as the square. And at 2.38 w/cm^2, the scale coefficient is not all that great.

[Retric]

Picture a stack of flat panels with each layer consisting of: (Cold)(Panel)(Hot)(Panel)(Cold) held vertically. So: (Cold)(Panel)(Hot)(Panel)(Cold)(Panel)(Hot)(Panel)(Cold)(Panel)(Hot)

Now you add hot gas at the bottom and have say 4 layers per m. So a 3mx3mx3m cube would be 4 layers * 2 panels per layer * 3m * 3m * 3m = 216m2 of panels taking up a 3mx3m section of floor. At 2.38w/cm2 * 10000cm2/m2 * 216m2 = 5.14 MW of power.

[ethbr0]

For long term energy banking and if we can get them working, flow batteries seem vastly superior to all alternatives, by scaling storage with regards to tank volume. Instead of some difficult-to-manufacture structure.