|
The $0.50 for $75 is a short term situation that will resolve once the fab's pipelines get filled again. We buy >1,000,000 per year and had no trouble getting them until the fab shut down. We'll be fine soon (looks like they've opened production again). The primary costs of starting up a fab are 1. facilities, 2. equipment. Facility per square foot is likely the most expensive you'll find due to the appurtenant systems required for air flow and purity, a variety of gas handling systems, ridiculous electrical power systems, possibly gas plant systems, water purification and then treatment systems for both air and fluids exiting the plant. Some truly scary toxins are used and produced and have to be contained or captured and neutralized. In terms of equipment, you'll need at least one of each of 40 types. Lowest cost is about $500,000. Highest is likely $25,000,000 (at the geometry you're talking about). Average in the area of $3,000,000 - $5,000,000. You'll need a cadre of engineers and scientists to keep it all running, and 2-3 years from breaking ground to producing product. If you did buy one of each tool type, you'd have most of them sitting around doing nothing most of the time, since the process times vary dramatically. In reality, you're looking at $500,000,000 minimum to build a fab that can produce $0.47 chips. Seriously, you don't want to do that. |
I had some misconceptions around how versitile auto manufacturers are. I'd sort of assumed they'd be very good at turning a low volume, low quality process into a high volume, high quality process. I'd also sort of assumed they'd have a ton of resources on hand, like space and power, the and the ability to build a lot of the required infrastructure.
I suppose they are far far more specialized and reallocating resources like that is the kind of thing you'd have to do right away, make a big commitment, that's basically pointless.